fog lights

Hi all, just for info. I installed this pair of switchback fog lights into my 19 T6 about a month ago; LED H11 Switchback Fog Unit I like to swap my fogs over to a proper yellow, however I've got aftermarket LED headlights installed on the T6 and although the new bulbs are super-bright, I'm...

Just a note for anyone else trying to work out which wire you need to splice into, to get spotlights working on a T6 that has factory fit LEDs, it's the thin white/black one and not the thicker white/black one on pin 8. There is another post here that said pin 6 was the low beam and pin 8 was...

Hi chaps, this is on my 5.1 not a t6 but should be the same. Van has failed mot on no rear fog either at the van or the trailer socket. It has a westfalia towbar loom just fitted and I cant help but think it's related to this. Everything else works fine but I also do not get the rear fog...

Just noticed I've got a fogged up os fog light. How do i get rid and stop it happening again?.:mad:

Just here.. Is it important..? It offends me so I'm inclined to stick a rubber grommet in there if it ain't..

Morning. I've just fitted some Phillips LED head lights etc and now want to change my fogs to LED as well so it matches. How easy is it to change the bulbs? I've looked for videos but can't find any

LED Fog Light upgrade (Dual colour) - How i Did it - Following on from @3shotdave original post about "New Led Fog Light Bulbs" i though i would give it a go. original post: New Led Fog Light Bulbs original credit: @3shotdave...

Just got rid of factory fitted fog light candles for new led's from Autobeam. Massive improvement, not drowned out by headlights now. No error lights either.

Erm....... how would one go about fitting fog lights to a Startline front bumper.........? Mine also has parking sensors in it, if that makes a difference. Oh, and if anyone has a recommendation for some not too pricy ones let me know! Thank you!

When I got the fog light bits off @Pauly, he said ‘take some photos’, so I’ve finally got around to writing up the fog light install for my Beach. I’ve put links to other videos and threads which explain things better than I can. Bumper removal Described many times on the forum and best shown...

Has anyone changed their front fogs to white / LED? I've got VW LED headlights and think the yellow fogs spoil the look. Also, can I switch off the way one comes on to show I'm turning??

Bit of a random question but can anyone who has LED headlights and has removed their front bumper tell me where/how the water pipe disconnects, is there a disconnection point in the pipework or does it simply uncouple at the washer pump connection that has a snap connector on it ?

Unused bulbs, well I never turned them on! I have upgraded to the LED ones. £10 - inclusive of postage Thanks, Ant

In the n/s arch lining, the fog light cover hole access thingy magiggy is missing. Can't figure out what's it's called so I can buy a new one. Anyone have a part number?

Just wondering if anyone on here has had an issue with the front fog lights letting some sort of water/moisture? Its only on the passenger side and is really starting to annoy me!

For all of you with the standard H4 units who fancy a change from the standard DRL layout, this is how you recode with VCDS to enable your fogs/cornering lights to DRL's What you need to do is go into central electrics controller 09 and change the following, Byte 23 Bit 2 which is actually the...

Hi all, has anyone successfully fitted any super white LED bulbs in their front fog lights? having LED headlights and these being a brilliant white, when the front fogs are on they look a dull yellow:thumbsdown: any advise on what's good would be great thanks

Pauly, do you know if it's possible to fit the standard fog lights as a retro fit, I have the trendline but need to put in fog lights as will be going for sportline front spoiler ?

Fitted replacement LED fog lamps the same as some of the guys have recommended on this forum .Thought I'd leave the covers off the inside wheel arch until I'd tested them . I wanted to cable tie the two driver units to the wiring loom to stop them sliding about which could eventually loosen...