I had a bump and it broke away and was leaking water. It’s booked in to get fixed, but I need to go on a decent drive and just want to make sure it’s not important. It’s not leaking any more and there are no lights on the dash. Cheers.
OK, so I'm having an internal dilemma; I've got a few options available to me but struggling to decide what way to go.
I'm hoping wine is going to help decide for me but your opinions would be appreciated!
1. Standard Bulbs - They work fine but I find the halogen colour a bit off. Personal...
Hi all, tried a search for led driving bulbs but only found suitable for t6 and older.
I hate the yellow driving lights as I’ve got the led headlights. Does anyone know of a direct suitable replacement that will not give me bulb errors?
Tia
Hello
I am a new member. I have ordered a new California Coast but it hasn’t got foglights. I could have ordered it as an option but it is too late. Can anyone please tell me if I can fit aftermarket fogs on a 6.1.
Thanks
I got the standard non-LED rear light with a joke of a reverse light. And I have invested in some small LED lights thats going to be mounted under the bumper somewhere.
So, does anyone know what color the wire is for the reverse light in the plug? Dont want to splitt the rear light unless I...
Hi all. Had my T6.1 since summer and decided to swap the bulbs whilst I wait for an aftermarket drl headlight to come out.
Swapped the fogs for these:
https://www.ebay.co.uk/itm/For-VW-T6-TRANSPORTER-2x-H11-Foglight-Led-Bulbs-Fog-Light-6000K-Bright-White-/392792724388...
I’m in the process of retro fitting some fog lights to my T6 and just after a bit of advice on the wiring connections for the titled.
As usual it didn’t have any info with it. I didn’t really want all that on off when cornering malarkey so went for the kit that is relay based with the auto...
Can somebody suggest why my 2018 Highline front foglights have packed up. They have been retrofitted with cheap LED type with resistor but no longer work. I fitted Osram H11 LED but did not work and then checked there was no 12v at lamp. Anyone got any ideas? Is there a fuse blown, and if there...
Hello everybody !
First please excuse my English, I am French and use the auto translator Google :unsure:
Unable to operate my front fog lights in my VW T6, despite several tests and controls.
- All fuses are OK
- All bulbs are OK
- If I remove a bulb from the front fog lights, I have the...
Hello all,
I've fitted H7 to my panel van that left the factory with H4's. Everything works as it should except the DRL's.
Coded BYTE 22, BIT 2 = 0 (low beam forced off while high beam on).
I've tested the bulb - it works.
I've powered the bulb when in the headlight - it works.
The only other...
Hi all,
I know this topic has been mentioned before but was wondering if any more info has come about regarding he replacement, I have a 2016 startline in white with standard non colour coded black one piece front bumper and would like to convert to a colour coded highline front bumper, does...
Just fitted the LED spot light bulbs and resisters from travelinlite - so much better they now match the LED headlights and absolutely no error reported - so a happy chap!!
T6 / T6.1 LED Fog Light Bulbs & Resistors
Hello
I have found my drivers side fog light is full of condensation and water. The passanger side is fine.
The problem I'm having is finding out how to actually remove it to inspect it. I can't find a site that has T6 specific instructions.
Does anyone know a site or instructions on how to...
Just browsing and came across these T6 foglights. on AE they seem to come with loom etc and a switch, was thinking fitting more for esthetic purposes. quite a few T6 parts on there.
US $12.32 14% OFF|Car Light For VW T6 Transporter for Multivan Caravelle T7 2015 2018 Car Styling Front Bumper...
Hi All, quick one. My N/S fog light is loose and only appears held in by one fixing on the left hand side of the light. What fixing holds it in? From the diagram it looks like a simple posi grub screw; anything else? A spring clip to screw into?
So i seen one of the guys on one of my FB groups had installed the new T6.1 tailgate LED rear lights and though yes i want those. So here is what you need and how i installed them.
Tools required:
Screw drivers and trim removal tool
Pin removing tool or two very small precision screwdrivers...
Just bought these for my 2018 T6. https://travelinlite-transporters.co.uk/collections/t6-front-lighting/products/t6-transporter-upgraded-headlight-bulb-kit-led-fog-upgrade-15-onwards
Amazing transformation and great price
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.