vcds

hi, I have installed trailer in 19 can gateway intallation list. Then need to code for the rear sensors. Gone into 10 park/steer assist and set bit01 to trailer hitch installed. When I click to do it I get a message saying coding rejected, error 33 security access required. Am I doing it wrong...

Any ideas as to what this means. It comes up as soon as I run the test option? Any help greatly appreciated.

There's been mention on some threads about using VCDS to activate the fader function, when rear speakers are added. Just wondering what other options or tick boxes are available under the audio headings? Is there an option to tell the head unit to recognise a factory fitted amplifier for...

I've converted my barn doors to a tailgate with LED lights. But I have a orange warning for bulb out on the instruments. VCDS scan showed no fault codes. If I go into 17-Instruments and go into measured values, what should I be looking for? The only concern I've found is "Status on input...

Here is a couple of nuggets for everyone: How to active Tyre pressure monitoring TPM (PR 7K9) How to active Hill descent control on 4Motion vehicles (PR UG5) Of course with UG5 the hill descent switch must be installed and wired to the ABS CU to activate. TPM activation is purely just software...

Morning all! Was changing the VCDS this morning to allow MPH in big on the dash screen. Love it! So this is Instruments 17 then coding. However when I was going through coding, it said in Bit 0-3 04 Distance Impulse Number 4 - VW Polo (6R) Should this be 06 Distance Impulse Number 6 - VW...

Vagnostics offers a mobile diagnostics and ECU remapping service for VW, Audi, Skoda, SEAT, Jaguar and Landrover vehicles in Scunthorpe, Grimsby, Doncaster, Lincoln and North Lincolnshire. Popped over to Sunny Scunny today to Matt who fitted me a nice new all dancing Multifunction Steering...

Hi, I’ve been trying to tweek my van with the usuall stuff using the guide on here and the only thing that seems to work is the needle sweep. The other stuff like audiable lock and auto lock/unlock says it’s active on the computer but doesn’t physically function. Any ideas?

From the factory T6 Webasto aux/parking (water) heater comes configured to heat cabin only. Up here in Finland the vans come with overhead control/timer panel to allow the use of timer or remote to switch on engine and cabin preheating before setting off. The heater is configured by dealer to...

Looking for 'normal' changes. Thanks.

Is there anyone in the Leicestershire area that can help with an issue? I've got a MK7 Golf as well as my T6, and just swapped the Golf steering wheel with the T6 one, giving me a flat bottom wheel with the all important paddles. The T6 is all sorted and working perfectly, but my Golf is now...

Evening. anyone in this area fancy flicking my reverse camera on before I cut a hole in my van? Want to make sure it works before cutting it! Will buy you a pint or bring some cake :) Cheers Si

I am near Woking in Surrey and have VCDS

Module 17 – Instruments carries also the coding to select a few scaling factors for speedometer. Byte 0, bits 0..3 have mysterious value “K-number”. It turned out changing this coding adjusts measuring values IDE00842 (K-number) and IDE00845 (Wheel circ. mm) of module 17 - Instruments, and...

Hey Any ideas how to fix this i lost both hi beams when connecting fog light retrofit dont get any fauld codes with vcds and not even didnt get fog lights working all wires are right place i even have take fog light wires off but still no hi beams all fuses are ok mesuring on under hi beam it...

so after spending the last hour reading about this magical power, what kind of things can it do to a T6 Highline to make it better? (Im pretty sure I will have Q module so wont ask about the folding mirrors ha)

hi, I have fitted LED Driving light bulbs to my T6, does anybody know the location of the code to disable the warning for this using VCDS please

Guys, I've recently fitted a pf Jones vehicle specific wiring kit for my T6 tow bar. Just been told by the dealer you need a vw wiring loom only to get the parking sensors to disable automatically. Anyone know if this is true? Cheers Paul

Hi all have just finished fitting my newly purchased led rear lights with fantastic paint by numbers instructions from @Pauly, i'm am left with a bulb monitoring light on the dash, which i presume has to be switched off with vcds. so if anyone would like to earn some beer tokens i will be more...

high as much as I love the van and in the dark when finding van the auto lights come on while I walk up to it but when I lock it in the dark unless I flip the flash I don’t get an auto coming home so when walking up drive to house I fall over the bloody dog and suggestions 2017 204ps 4motion