OEM Webasto Auxiliary Heater To Parking Heater Upgrade

Hi all, I have ordered all the parts as per the list on here and am trying to get ready for the flash and coding required of the Webasto. I am happy to purchase VCDS as I think it will pay itself off with other tasks as well over the next few months/years.

Do I also need VCS to do the actual flash? Or somebody that has it? Everytime I google it it just comes up with probably means VCDS.

Thanks for any help and apologies for the amateur question. I’m new to VW so not familiar with all the software normally yet.
 
eugene said:
Interestingly, the Carsystems and Kufatec sites don't have the factory retrofit kits yet available for T6.1...
Click to expand...
Hi @eugene ,
FYI
it seems that as today, actually Kufatec does have a kit for the T6.1 and specifically for 5 different versions of AC (including manual with passenges cabin 2nd exchanger, like mine, that I discovered being VW option KC4).
See this Link

Unfortunately they do not say much about how they handle all the stuff..
But, since they say you have to do some work on-line with them, I guess they flash the Webasto ROM too.

So now, together with Danhag, it seems there are 2 commercial offers, similarly priced, that can do the job. At first look I still like more the Danhag, especially the Plug&Play one, because its minimal alterations/rewiring to the Bus.
Danhag does not flash the Webasto, but relies in one CAN box that tricks the whole system. Plus an optional second one if buy the Plug&Play, that is "only" to control the van's fans without rewiring. Interestingly, one could buy the very basic version that controls only the water heater, and work his own way for the fans.

BTW,
Any update about your solution especially the option of not installing/changing the overhead control panel?
 
FWhite said:
Hi @eugene ,
FYI
it seems that as today, actually Kufatec does have a kit for the T6.1 and specifically for 5 different versions of AC (including manual with passenges cabin 2nd exchanger, like mine, that I discovered being VW option KC4).
See this Link

Unfortunately they do not say much about how they handle all the stuff..
But, since they say you have to do some work on-line with them, I guess they flash the Webasto ROM too.

So now, together with Danhag, it seems there are 2 commercial offers, similarly priced, that can do the job. At first look I still like more the Danhag, especially the Plug&Play one, because its minimal alterations/rewiring to the Bus.
Danhag does not flash the Webasto, but relies in one CAN box that tricks the whole system. Plus an optional second one if buy the Plug&Play, that is "only" to control the van's fans without rewiring. Interestingly, one could buy the very basic version that controls only the water heater, and work his own way for the fans.

BTW,
Any update about your solution especially the option of not installing/changing the overhead control panel?
Click to expand...
Kufatec's kit also includes the overhead display control panel.
  • Selectable options:
    • Version 1, Camper, PR-No.: K4L
    • Version 2, Air conditioning, PR-No.: 9AC or 9AH
    • Version 3, Air conditioning, PR-No.: KH6
    • Version 4, Air conditioning, PR-No.: KC2
    • Version 5, Air conditioning, PR-No.: KC3 or KC4
  • Scope of delivery:
    • Cable harness
    • Receiver
    • Remote control
    • Roof control unit (not for version 1)
    • Coding dongle
Version 1 is for cars that already have roof control unit.

I already covered what is required in my previous posts. Kufatec site confirms this.
Kufatec prices are horrendous. It's hard to justify the cost they charge, even for new parts!
For example their variant 1 kit without the roof control panel is 800 EUR. This is beyond what can be explained. The price for the same kit on ebay is around 200 eur.

If you're seriously considering Danhag, read this post:
tx-board.de

T6.1 - Zuheizer zur Wasserstandheizung aufrüsten (original)

@Fite, vielen Dank für die detaillierten Anleitungen und das komfortable Remote-Flashen und Freischalten der Bedienungen. Es funktioniert alles super. Ich kann diese Variante des Aufrüstens sehr empfehlen.
tx-board.de tx-board.de
 
Hi @eugene,
So in few words :
Kufatec is very similar to yours but too expensive,
and Danhag doesn't actually work,
correct?

And your one (that anyway includes some 1000 € of overhead unit too) is yet untested in a configuration like Kufatecs' Version (5 ) - KC4 secondary heater/echanger, correct?

Then could you please point me out one of those proper T6.1 ebay kits for 200 EU?
 
FWhite said:
Hi @eugene,
So in few words :
Kufatec is very similar to yours but too expensive,
and Danhag doesn't actually work,
correct?

And your one (that anyway includes some 1000 € of overhead unit too) is yet untested in a configuration like Kufatecs' Version (5 ) - KC4 secondary heater/echanger, correct?

Then could you please point me out one of those proper T6.1 ebay kits for 200 EU?
Click to expand...
By now we have installed and tested the T6.1 setup and it works. Why shouldn't it work if it's per factory?

Requires wiring and reflashing. For reflashing - ODIS is required and an appropriate adapter.

Regarding parts - please shoot me a PM.
 
Alied said:
@eugene Can you use VCP to reflash the heater or is it ODIS only?
Click to expand...
Not always a positive result, unfortunately. I've heard that some people buy everything necessary on Ali. If I was to go this route, I would definitely get a dedicated laptop to ensure no malware is mingling with my work pc. Probably not a topic for this thread.
 
Hsgio76 said:
A remote control with these 7N0 numbers is not allowed to work with this 5Q0 control unit. Unless someone installed different electronics and the numbers remained on the housing.
Click to expand...
Are you sure and can you explain why please?
 
dvk29 said:
VW T6 2019
Click to expand...
What engine you have got? Please share full VCDS Auto-Scan.

dvk29 said:
system that can control it via the W-bus.
Click to expand...
I'm afraid it won't work with VW OEM software.

dvk29 said:
I read the messages and saw an assumption that in order for the W-BUS management to open, the software must be updated to version 7E0963272C
Click to expand...
Have you got a link?
I have my doubts about 7E0963272C being an update for 7E0963272B - as the control unit ...272 C is for petrol heater.

7E0 962 272 C.webp
 
Hi everyone, I have a t6 MY 2018 and I'm trying to install a telestart T99. I followed the T5 bus bits guide. I flashed the suitable firmware with Odis-e and then did the coding with VCDS. I already had the setup for the LIN line under the seat that I connected to the Telestart receiver. The problem is that the webasto is not working. Can someone help me? Thank you very much.
 
mmi said:
Please share full VCDS Auto-Scan.



Per Webasto the Telestart T99 has only 12V and W-bus outputs for heater control - thus not compatible with MB, BMW, VW, Ford heaters factory installed software.
Click to expand...
Hello,
Here the VCDS scan:

Code: 
Friday,26,December,2025,16:26:10:00009
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
VCDS Version: 20.4.2.0 (x64)
Data version: 20200730 DS317.0
www.Ross-Tech.com


VIN: WV2ZZZ7HZKH051550   License Plate:


Chassis Type: 7H-VN75 (7E0)
Scan: 01 03 04 08 09 10 15 17 18 19 25 5F 61

VIN: WV2ZZZ7HZKH051550   Mileage: 287830km-178849miles

01-Engine -- Status: Malfunction 0010
03-ABS Brakes -- Status: Malfunction 0010
04-Steering Angle -- Status: OK 0000
08-Auto HVAC -- Status: Malfunction 0010
09-Cent. Elect. -- Status: Malfunction 0010
10-Park/Steer Assist -- Status: OK 0000
15-Airbags -- Status: OK 0000
17-Instruments -- Status: OK 0000
18-Aux. Heat -- Status: Malfunction 0010
19-CAN Gateway -- Status: OK 0000
25-Immobilizer -- Status: OK 0000
5F-Information Electr. -- Status: OK 0000
61-Battery Regul. -- Status: OK 0000
 
-------------------------------------------------------------------------------
Address 01: Engine (J623-CXFA)       Labels: None
   Part No SW: 04L 906 056 LT    HW: 04L 907 445
   Component: R4 2.0l TDI   H02 6430 
   Revision: 23002001   
   Coding: 0019401C432401080000
   Shop #: WSC 00012 790 50316
   ASAM Dataset: EV_ECM20TDI03004L906056LT 004004
   ROD: EV_ECM20TDI03004L906056LT.rod
   VCID: 0A1B172FAD3F40D64D-805E

9 Faults Found:
25806 - No Communications with Airbag Control Module
          U0151 00 [032] - -
          Intermittent - Not Confirmed - Tested Since Memory Clear

25807 - No Communication with ABS Brake Control Module
          U0121 00 [032] - -
          [New feature! Extended UDS fault detail is only supported by current gen. interfaces]
          Intermittent - Not Confirmed - Tested Since Memory Clear

25809 - Power Steering Control Module
          U101D 00 [032] - No Communication
          [New feature! Extended UDS fault detail is only supported by current gen. interfaces]
          Intermittent - Not Confirmed - Tested Since Memory Clear

25810 - No Communication with Instrument Cluster
          U0155 00 [032] - -
          [New feature! Extended UDS fault detail is only supported by current gen. interfaces]
          Intermittent - Not Confirmed - Tested Since Memory Clear

25811 - No Communications with HVAC Control Module (J301)
          U0164 00 [032] - -
          Intermittent - Not Confirmed - Tested Since Memory Clear

25798 - No Communications with Aux. Heater Control Module
          U0166 00 [032] - -
          Intermittent - Not Confirmed - Tested Since Memory Clear

33936 - Fuel Rail/System Pressure
          P0087 00 [096] - Too Low
          Intermittent - Not Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 1
                    Mileage: 287921 km
                    Date: 2025.12.25
                    Time: 22:37:06

                    Engine speed: 1375.00 /min
                    Normed load value: 96.9 %
                    Vehicle speed: 77 km/h
                    Coolant temperature: 67 °C
                    Intake air temperature: 5 °C
                    Ambient air pressure: 960 mbar
                    Voltage terminal 30: 14.437 V
                    Unlearning counter according OBD: 40
                    Rail pressure regulation: status: Regulated operation via quantity control valve
                    Fuel high pressure sensor: nominal value: 1591.0 bar
                    Fuel high pressure sensor: actual value: 1387.0 bar
                    High fuel pressure: control deviation: 200 bar
                    RPC_Hp_control_state-HPV_Status: RPC_HP_CLOSED_LOOP
                    RPC_Im_control_state-Status: RPC_IM_FILLING_RAIL
                    HPV current demand coming from the HPV control: 1300 mA
                    HPV current demand coming from the IMV control: 100 mA
                    Mean injection quantity: 58 mg/stroke
                    Setpoint generation interior torque: 362.2 Nm
                    Release requirement for DPF regeneration: 6
                    Fuel temp. sensor 1 bank 1: raw value: 23.2 °C
                    Voltage terminal 30: 14.448 V
                    Median vehicle speed: 77.57 km/h
                    Terminal 15 status: On

33938 - Fuel Rail/System Pressure
          P0087 00 [096] - Too Low
          Intermittent - Not Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 2
                    Mileage: 287920 km
                    Date: 2025.12.25
                    Time: 22:36:07

                    Engine speed: 1808.50 /min
                    Normed load value: 99.6 %
                    Vehicle speed: 85 km/h
                    Coolant temperature: 54 °C
                    Intake air temperature: 11 °C
                    Ambient air pressure: 960 mbar
                    Voltage terminal 30: 14.867 V
                    Unlearning counter according OBD: 40
                    Rail pressure regulation: status: Regulated oper. via press. ctrl valve and quant. ctrl valve
                    Fuel high pressure sensor: nominal value: 1954.0 bar
                    Fuel high pressure sensor: actual value: 1699.0 bar
                    High fuel pressure: control deviation: 258 bar
                    RPC_Hp_control_state-HPV_Status: RPC_HP_CLOSED
                    RPC_Im_control_state-Status: RPC_IM_CLOSED_LOOP
                    HPV current demand coming from the HPV control: 1490 mA
                    HPV current demand coming from the IMV control: 390 mA
                    Mean injection quantity: 64 mg/stroke
                    Setpoint generation interior torque: 398.3 Nm
                    Release requirement for DPF regeneration: 5
                    Fuel temp. sensor 1 bank 1: raw value: 15.0 °C
                    Voltage terminal 30: 14.878 V
                    Median vehicle speed: 85.42 km/h
                    Terminal 15 status: On

25126 - Implausible Data Received from ESP Control Module
          U0416 00 [032] - -
          Intermittent - Not Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 6
                    Fault Frequency: 2
                    Mileage: 287917 km
                    Date: 2025.12.25
                    Time: 21:17:51

                    Engine speed: 0.00 /min
                    Normed load value: 0.0 %
                    Vehicle speed: 0 km/h
                    Coolant temperature: 35 °C
                    Intake air temperature: 25 °C
                    Ambient air pressure: 960 mbar
                    Voltage terminal 30: 12.203 V
                    Unlearning counter according OBD: 40
                    Acceleration: 0.000 m/s²
                    Median vehicle speed: 0.00 km/h
                    Cruise Control System (CCS): status: Initializing
                    Drivetrain coordinator: ACC fault status-ACC is active despite EPB deceleration: No
                    Drivetrain coordinator: ACC fault status-ACC active: although TSK passive: No
                    Drivetrain coordinator: ACC fault status-Start off or stop request at stopping speed not set: No
                    Drivetrain coordinator: ACC fault status-Start off and stop request sent simultaneously: No
                    Drivetrain coordinator: ACC fault status-ACC active: although limiter active: No
                    Drivetrain coordinator: ACC fault status-ACC reactivates itself after locking: No
                    Drivetrain coordinator: ACC fault status-ACC sends undefined signals: No
                    Drivetrain coordinator: ACC fault status-ACC active although main switch off: No
                    Drivetrain coordinator: ACC fault status-ACC is active despite driver braking: No
                    Drivetrain coordinator: ACC fault status-ACC is active despite ESP/ASR passive sampling: No
                    Drivetrain coordinator: brake function status-ABS intervention: No
                    Drivetrain coordinator: brake function status-ESP intervention: No
                    Drivetrain coordinator: brake function status-EDL intervention: No
                    Drivetrain coordinator: brake function status-ASR intervention: No
                    Drivetrain coordinator: brake function status-MSR intervention: No
                    Drivetrain coordinator: brake function status-Driver braking: No
                    Drivetrain coordinator: brake function status-HDC active: No
                    Drivetrain coordinator: brake function status-ESP invokes TSK braking: No
                    Drivetrain coordinator: brake function status-EPB active: No
                    Drivetrain coordinator: brake function status-ASP intervention: No
                    Drivetrain coordinator: brake function status-ADS intervention: No
                    Drivetrain coordinator: brake function status-Stopping distance reduction2 warning jolt: No
                    Drivetrain coordinator: brake function status-ESP sampled passive (ESP off): No
                    Drivetrain coordinator: brake function status-ASR sampled passive (ASR off): No
                    Drivetrain coordinator: brake function status-ESP recognizes vehicle at rest: No
                    Drivetrain coordinator: brake function status-ACC stopping distance control active: No
                    Drivetrain coordinator: brake fault status-Deceleration sensor not available: No
                    Drivetrain coordinator: brake fault status-Deceleration sensor malfunction: No
                    Drivetrain coordinator: brake fault status-ESP system error: No
                    Drivetrain coordinator: brake fault status-ESP system malfunction due to inaccurate engine torque: No
                    Drivetrain coordinator: brake fault status-ESP indicates TSK message consistency error: No
                    Drivetrain coordinator: brake fault status-TSK/ESP handshake error: No
                    Drivetrain coordinator: brake fault status-ESP automatic engagement malfunction: No
                    Drivetrain coordinator: brake fault status-Brake light implausible: No

Readiness: N/A

-------------------------------------------------------------------------------
Address 03: ABS Brakes (J104)       Labels: 7E0-907-37x-MK100ESC.clb
   Part No SW: 7E0 907 379 P    HW: 7E0 907 379 M
   Component: ESC           H06 0133 
   Revision: 00000000    Serial number: 63048000002212
   Coding: 307E40982567847F0C7A027BA48221D3780000
   Shop #: WSC 00012 790 50316
   ASAM Dataset: EV_Brake1ESCCONTIVN75XGP2 011001
   ROD: EV_Brake1ESCCONTIVN75XGP2_011.rod
   VCID: 3F8DF6FBA67DB57E2A-806A

1 Fault Found:
8335 - Databus
          U1122 00 [008] - Implausible Message
          [New feature! Extended UDS fault detail is only supported by current gen. interfaces]
          Intermittent - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 1
                    Fault Frequency: 8
                    Reset counter: 19
                    Mileage: 287809 km
                    Date: 2025.12.25
                    Time: 21:16:59


-------------------------------------------------------------------------------
Address 04: Steering Angle (G085)       Labels:* 6R0-959-654.clb
   Part No SW: 6R0 959 654     HW: 6R0 959 654
   Component: LENKW.SENSOR  H07 0070 
   Serial number: 18101813470881
   Coding: 01
   Shop #: WSC 00000 000 00000
   ASAM Dataset: EV_LWSKLOVW25X 005001
   ROD: EV_LWSKLOVW25X.rod
   VCID: 7EF34BFFE1F77C7661-802A

No fault code found.

-------------------------------------------------------------------------------
Address 08: Auto HVAC (J255)       Labels:| 7E5-907-040.clb
   Part No SW: 7E0 907 040 AA    HW: 7E0 907 040 AA
   Component: ClimatronicT5 H04 0613 
   Revision: 00001K04   
   Coding: 0004000103
   Shop #: WSC 00012 790 50316
   ASAM Dataset: EV_ClimatronicT5 A01003
   ROD: EV_ClimaAutoT5Basis.rod
   VCID: 62CB1F8F754FB89665-8036

   Slave 1:
   Subsystem 1 - Part No SW: 7E5 907 049 C    HW: 7E5 907 049 C
   Component: Heckbedienung  H11 0303
   Serial number: BHB-0012510180015299

3 Faults Found:
13701376 - Function Restricted due to Missing Message(s)
          U1111 00 [008] - -
          [New feature! Extended UDS fault detail is only supported by current gen. interfaces]
          Intermittent - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 6
                    Fault Frequency: 1
                    Reset counter: 19
                    Date: 2025.12.25
                    Time: 21:30:44

13701392 - Function Restricted due to Missing Message(s)
          U1111 00 [008] - -
          [New feature! Extended UDS fault detail is only supported by current gen. interfaces]
          Intermittent - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 6
                    Fault Frequency: 1
                    Reset counter: 19
                    Date: 2025.12.25
                    Time: 21:30:44

13701456 - Function Restricted due to Missing Message(s)
          U1111 00 [008] - -
          [New feature! Extended UDS fault detail is only supported by current gen. interfaces]
          Intermittent - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 6
                    Fault Frequency: 1
                    Reset counter: 19
                    Date: 2025.12.25
                    Time: 21:22:16


-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519)       Labels:. 7E0-937-BCM-V1.clb
   Part No SW: 7E0 937 090 D    HW: 7E0 937 090 D
   Component: BCM PQ25 Max4 H82 0762 
   Revision: B9082001    Serial number: 8601 309180657
   Coding: 72A8393A0A21201201284F746CEB8ED49F84710F60CC6D60330400230840
   Shop #: WSC 66305 512 175031
   VCID: 2C57B1B74F0B3EE69F-8078

   Subsystem 1 - Part No: 5K7 955 559 C  Labels: 5K7-955-559.CLB
   Component: RLS 021118 05  50  0106
   Coding: 0228DD

   Subsystem 2 - Part No SW: 7E0 959 801 N    HW: 7E0 959 801 N  Labels: 7E0-959-80X-V2.CLB
   Component: J386__TSG_FT  004 0653
   Serial number: KU0KU001111883051275
   Coding: 0400A1

   Subsystem 3 - Part No SW: 7E0 959 802 R    HW: 7E0 959 802 R  Labels: 7E0-959-80X-V2.CLB
   Component: J387__TSG_BT  005 0653
   Serial number: KU0KU029101883020229
   Coding: 1400A1

   Subsystem 4 - Part No SW: 7E0 959 442     HW: 7E0 959 442   Labels: 3C8-959-537.CLB
   Component: E221__MFL-DC1  H02 0103
   Serial number: 39180001932290038414
   Coding: B0FFFF

4 Faults Found:
00978 - Lamp for Low Beam; Left (M29)
            010 - Open or Short to Plus
             Freeze Frame:
                    Fault Status: 01101010
                    Fault Priority: 3
                    Fault Frequency: 16
                    Reset counter: 234
                    Mileage: 287809 km
                    Time Indication: 0
                    Date: 2020.05.17
                    Time: 22:25:10

00979 - Lamp for Low Beam; Right (M31)
            010 - Open or Short to Plus
             Freeze Frame:
                    Fault Status: 01101010
                    Fault Priority: 3
                    Fault Frequency: 14
                    Reset counter: 234
                    Mileage: 287809 km
                    Time Indication: 0
                    Date: 2020.05.17
                    Time: 22:25:10

01495 - Bulb for High-Beams; Left (M30)
            010 - Open or Short to Plus
             Freeze Frame:
                    Fault Status: 01101010
                    Fault Priority: 3
                    Fault Frequency: 1
                    Reset counter: 234
                    Mileage: 287816 km
                    Time Indication: 0
                    Date: 2020.05.18
                    Time: 12:23:60

01499 - Bulb for High-Beams; Right (M32)
            010 - Open or Short to Plus
             Freeze Frame:
                    Fault Status: 01101010
                    Fault Priority: 3
                    Fault Frequency: 1
                    Reset counter: 234
                    Mileage: 287816 km
                    Time Indication: 0
                    Date: 2020.05.18
                    Time: 12:23:60


-------------------------------------------------------------------------------
Address 10: Park/Steer Assist (J446)       Labels:| 7E0-919-475.clb
   Part No SW: 7E0 919 475 AA    HW: 7N0 919 475
   Component: PARKHILFE 8K  H06 0212 
   Revision: --------    Serial number: 28231822004028
   Coding: 108008
   Shop #: WSC 00012 790 50316
   ASAM Dataset: EV_VW75XParkAssis8K 001012
   ROD: EV_VW75XParkAssis8K_001_VN75.rod
   VCID: 71E960C3A0A9130EEC-8024

No fault code found.

-------------------------------------------------------------------------------
Address 15: Airbags (J234)       Labels:| 5K0-959-655.clb
   Part No SW: 7E0 959 655 K    HW: 7E0 959 655 K
   Component: VW10Airbag01R 010 0018 
   Revision: --------    Serial number: 003EM001X9KG
   Coding: 000000000000000000000000000000003152
   Shop #: WSC 00012 790 50316
   ASAM Dataset: EV_AirbaVW10BPAVW12X 001028
   ROD: EV_AirbaVW10BPAVN750.rod
   VCID: 3E738BFFA177BC7621-806A

   Crash sensor for side airbag: driver side:
   Serial number: 3495ZRB405F5FGCK9O8C

   Crash sensor for side airbag: front passenger side:
   Serial number: 3505ZRB404T5FGCKCOMY

No fault code found.

-------------------------------------------------------------------------------
Address 17: Instruments (J285)       Labels:| 5K0-920-xxx-17.clb-SRI1
   Part No SW: 7E0 920 871 A    HW: 7E0 920 871 A
   Component: KOMBI         H02 2030 
   Serial number: 00000000000000
   Coding: 140F010400
   Shop #: WSC 00012 790 50316
   ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A05736
   ROD: EV_Kombi_UDS_VDD_RM09_005_VW31.rod
   VCID: 285F4DA753F312C67B-807C

No fault code found.

-------------------------------------------------------------------------------
Address 18: Aux. Heat (J364)       Labels:| 7E0-963-27X-18.clb
   Part No SW: 7E0 963 272 B    HW: 7E0 963 273 A
   Component: STH-T5GP2     003 0009 
   Coding: 5901
   Shop #: WSC 69905 136 139810
   ASAM Dataset: EV_AuxilParkiHeateWOST5G2 001013
   ROD: EV_AuxilParkiHeateWOST5G2.rod
   VCID: 2B55B2AB420539DE96-807E

5 Faults Found:
0266 - Databus
          U1121 00 [009] - Missing Message
          [New feature! Extended UDS fault detail is only supported by current gen. interfaces]
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 6
                    Fault Frequency: 1
                    Reset counter: 234
                    Mileage: 287809 km
                    Date: 2025.12.25
                    Time: 22:07:44

                    Operating condition of parking heater: System malfunction
                    71
                    Coolant temperature of parking heater: 22 °C
                    Coolant temperature: 28 °C
                    Engine running status: not recognized
                    Fuel level: 27 l
                    Heater output: 0 W

0280 - Local Data Bus
          U10BA 00 [009] - No Communication
          [New feature! Extended UDS fault detail is only supported by current gen. interfaces]
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 6
                    Fault Frequency: 1
                    Reset counter: 234
                    Mileage: 287809 km
                    Date: 2025.12.25
                    Time: 22:07:44

                    Operating condition of parking heater: System malfunction
                    71
                    Coolant temperature of parking heater: 22 °C
                    Coolant temperature: 28 °C
                    Engine running status: not recognized
                    Fuel level: 27 l
                    Heater output: 0 W

0281 - Local Data Bus
          U10BA 00 [009] - No Communication
          [New feature! Extended UDS fault detail is only supported by current gen. interfaces]
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 6
                    Fault Frequency: 1
                    Reset counter: 234
                    Mileage: 287809 km
                    Date: 2025.12.25
                    Time: 22:07:44

                    Operating condition of parking heater: System malfunction
                    71
                    Coolant temperature of parking heater: 22 °C
                    Coolant temperature: 28 °C
                    Engine running status: not recognized
                    Fuel level: 27 l
                    Heater output: 0 W

0048 - Control Circuit for Front Air Blower
          B10A0 15 [009] - Open or Short to Plus
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 3
                    Fault Frequency: 1
                    Reset counter: 234
                    Mileage: 287809 km
                    Date: 2025.12.25
                    Time: 22:07:45

                    Operating condition of parking heater: System malfunction
                    71
                    Coolant temperature of parking heater: 22 °C
                    Coolant temperature: 28 °C
                    Engine running status: not recognized
                    Fuel level: 27 l
                    Heater output: 0 W

0135 - Heater Unit Locked
          B138F 00 [009] - -
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 234
                    Mileage: 287827 km
                    Date: 2025.12.26
                    Time: 15:23:37

                    Operating condition of parking heater: locked
                    71
                    Coolant temperature of parking heater: 31 °C
                    Coolant temperature: 39 °C
                    Engine running status: detected
                    Fuel level: 23 l
                    Heater output: 0 W


-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533)       Labels:. 7E0-909-901.clb
   Part No SW: 7E0 909 901     HW: 7E0 937 090 D
   Component: GW-K-CAN TP20 H82 0762 
   Revision: B9082001   
   Coding: 042207
   Shop #: WSC 66305 512 175031
   VCID: 68DF0DA79B73D2C6BB-803C

No fault code found.

-------------------------------------------------------------------------------
Address 25: Immobilizer (J334)       Labels:| 5K0-920-xxx-25.clb
   Part No SW: 5K0 953 234     HW: 5K0 953 234
   Component: IMMO          H02 2030 
   Serial number:              
   Coding: 000002
   Shop #: WSC 00012 790 50316
   ASAM Dataset: EV_Immo_UDS_VDD_RM09 A03710
   ROD: EV_Immo_UDS_VDD_RM09_VW31.rod
   VCID: 6ADB77AF8D7FE0D6AD-803E

No fault code found.

-------------------------------------------------------------------------------
Address 5F: Information Electr. (J794)       Labels:| 5G0-035-MIB-STD2.clb
   Part No SW: 5C0 035 680 F    HW: 5C0 035 680 F
   Component: MU-S-N-ER     H41 0472 
   Serial number: VWZAZ2U1636665
   Coding: 06570001BE00000011110001000808001F0100C4002001004F
   Shop #: WSC 00012 790 50316
   ASAM Dataset: EV_MUStd4CTSAT 001022
   ROD: EV_MUStd4CTSAT_VW32.rod
   VCID: 244759972FDBF6A657-8070

   Data medium:
   Subsystem 1 - Part No SW: V03 959 823 AS    HW: -----------
   Component: ECE DL1 2026  --- 2510
   Serial number: --------------------

No fault code found.

-------------------------------------------------------------------------------
Address 61: Battery Regul. (J840)       Labels:. 1K0-907-534.clb
   Part No SW: 7E0 907 534     HW: 7E0 937 090 D
   Component: Batt.regelung H82 0762 
   Serial number: 8601 309180657
   Coding: 030B1A73
   Shop #: WSC 00012 790 00042
   VCID: 68DF0DA79B73D2C6BB-803C

   Subsystem 1 - Part No SW: 7E0 915 181 K    HW: 7E0 915 181 K
   Component: J367-BDMConti  H03 1050
   Serial number: 75885701001810250EBD

No fault code found.

End-------------------------(Elapsed Time: 02:49)--------------------------

Thank you very much!
 
Last edited by a moderator:
Umberto said:
Here the VCDS scan:
Click to expand...
Thanks.

Unfortunately the heater doesn't recognise Telestart receiver. Should be seen as a submodule in the scan.
I think the faults 0280, 0282 "Local Data Bus - No communication" are because of the receiver missing/not recognised.

The remote control receiver would have shown in the scan like this:
-------------------------------------------------------------------------------​
Address 18: Aux. Heat (J364) ​
Part No SW: 7E0 963 272 B HW: 7E0 963 272 B​
Component: STH-T5GP2 003 0009 ​
Coding: 5901​
​
Remote Control Auxiliary Heater: ​
Subsystem 1 - Part No SW: 3Q0 963 513 HW: 3Q0 963 513 ​
Component: R64 D208L 004 0402 ​
-------------------------------------------------------------------------------​
​

Umberto said:
Address 18: Aux. Heat (J364) Labels:| 7E0-963-27X-18.clb Part No SW: 7E0 963 272 B HW: 7E0 963 273 A Component: STH-T5GP2 003 0009 Coding: 5901
Click to expand...
Umberto said:
0048 - Control Circuit for Front Air Blower B10A0 15 [009] - Open or Short to Plus Confirmed - Tested Since Memory Clear
Click to expand...
The fault 0048 above is because of wrong coding - for Climatronic HVAC the coding should be 5101 - see OEM Webasto Auxiliary Heater To Parking Heater Upgrade

Umberto said:
Address 08: Auto HVAC (J255) Labels:| 7E5-907-040.clb Part No SW: 7E0 907 040 AA HW: 7E0 907 040 AA Component: ClimatronicT5 H04 0613
Click to expand...
 
mmi said:
Thanks.

Unfortunately the heater doesn't recognise Telestart receiver. Should be seen as a submodule in the scan.
I think the faults 0280, 0282 "Local Data Bus - No communication" are because of the receiver missing/not recognised.

The remote control receiver would have shown in the scan like this:
-------------------------------------------------------------------------------​
Address 18: Aux. Heat (J364) ​
Part No SW: 7E0 963 272 B HW: 7E0 963 272 B​
Component: STH-T5GP2 003 0009 ​
Coding: 5901​
​
Remote Control Auxiliary Heater: ​
Subsystem 1 - Part No SW: 3Q0 963 513 HW: 3Q0 963 513 ​
Component: R64 D208L 004 0402 ​
-------------------------------------------------------------------------------​
​



The fault 0048 above is because of wrong coding - for Climatronic HVAC the coding should be 5101 - see OEM Webasto Auxiliary Heater To Parking Heater Upgrade
Click to expand...
Thanks for your reply. The 5101 coding doesn't solve the problem. Do you recommend buying a T91 at this point?
 
Umberto said:
The 5101 coding doesn't solve the problem.
Click to expand...
Well, agreed, however it should take away the fault 0048.

Umberto said:
Do you recommend buying a T91 at this point?
Click to expand...
No, instead you need to buy the VW version.

Either
5Q0963513A - receiver + 7N0963511 - remote​
​
or

3Q0 963 513 - receiver + 3G0 963 511 -/A/B -remote​
 
You must log in or register to reply here.

Similar threads

eugene
VW T6.1 Webasto Aux Heater To Parking Heater Upgrade
Replies
1
Views
810
Robert
Robert
rippelep
retrofit auxiliary/parking heater to camper van which has no oem heater installed
Replies
16
Views
3K
eugene
eugene
0
OEM Thermo heating to parking-heater adaptation?
Replies
7
Views
5K
TurboTore
T
K
Factory Options for Auxiliary/Parking Heaters on T6.1
Replies
0
Views
6K
Kombi Zombi
K
T
Aux Heater coding - 2020 Caravelle
2
Replies
37
Views
17K
eugene
eugene
Back
Top