Do you know what sort of clip?Yes, you may need a hose clamp as well though.
Do you know what sort of clip?Yes, you may need a hose clamp as well though.
Awesome...Well, as I found the quick release fitting for the Cadac in the box. Today I went o a new Go Outdoors centre as I happened to be parked nearby. Asked 3 assistants if they sold the rubber hoses, the 3rd seemed to have a remote idea of what I was talking about. However it was about the only bit of Cadac stuff we couldnt find on the display. Then I noticed, on a different shelf, no packaging, labels or any others a rubber tube. I said, thats what I am looking for, except the 1.5m version.
The assistant had no idea where it came from so he said I could have it. So my Cadac is now quick release
View attachment 160961
Brilliant idea, looks like I have a new job to do!ok , the missus want to run the Cadac 2 pro, and the Cadac Carri Chef 2 the next campout.
Hmmm . . . . . . . .
+++++++++
View attachment 205705 + View attachment 205706
+++++++++
we now run the 5kg flow gas. . .
View attachment 205704
+++++++++
that means we need a splitter,
i had a quick look about, but my Google foo failed me . . .
so it was time for a MacGyver.
+++
this is what im going with:
new RED Regulator with fuel gauge : https://amzn.to/3NS0JBt
View attachment 205707
a Gas Y piece . . . . with some extra hose and jub` clips : https://amzn.to/3XUE8J8
View attachment 205708
and a few extra Quick Release gas connectors . . . : https://amzn.to/3pM4tfE
View attachment 205709
plus some extra long hose, 5meters in this case. . . . : https://amzn.to/3NURTmr
View attachment 205710
+++++++++++++++
this is what i knocked together. . .
RED reg to QR . . .
View attachment 205711
with a QR Y-piece . . .
View attachment 205712
.
the a short QR pipe. . . . .
View attachment 205713
and a long QR pipe . . .
View attachment 205714
all together we have this. . . . .
View attachment 205715
which goes together like this . . . .
View attachment 205716
......
The idea being that the Gas Bottle can sit out the way,
the shorter 1.5M QR pipe will feed the CADAC 2pro on the kitchen table in the awning.
the there is a 5m QR pipe to feed the CADAC Carri Chef that can be just out the awning, or full outside - BBQ stlye.
well that's the theory.
now for the practical test. . . .
ill take it all to T6F summer camp 23 and give it a test.
++++
View attachment 205717View attachment 205718View attachment 205719View attachment 205720
Excellent bit of MacGyver-ing there.ok , the missus want to run the Cadac 2 pro, and the Cadac Carri Chef 2 the next campout.
Hmmm . . . . . . . .
+++++++++
Also, is that a very large mug or a very small hob?ok , the missus want to run the Cadac 2 pro, and the Cadac Carri Chef 2 the next campout.
Hmmm . . . . . . . .
+++++++++
View attachment 205718
HI Delmassive, great thread. I have installed a Smev 9722 and want to run it off a QR Cadac dual power pack wot I have bought. I will also be using a Cadac pro outside the van so wanted to be able to swap over easily. I have attached the hose from the hob using the compression fitting but now need a 'male' fitting to go into the end of the orange tube that the Cadac QR will attach to but I am not sure what to order. I got a Fulham 1/4" delivered (on left) but the thread doesn't fit the Cadac bit (middle) so I am guessing the thread is the wrong way around ?Yes the QR valves are shut off when not connected.
I've adapted all my gas stuff to QR now.
And have made up a few more QR pipes as well.
I've also made up a QR blue REG hose.
Now all my gear is QR and plug and play everything..
Any gas bottle, any gas cooker, any gas BBQ, any combo.