Hi guys,
Essentially I just need some peace of mind.. I've installed my camper windows both sides and rears. I cut all four holes out first and then carpet lined inside. However, I carpet lined over both skins and about 10-15mm on the outer skin all the way round the window holes. Installed the...
Hi new member and have already used this forum for loads of resources. I’m just starting my conversion journey.
Has anyone got any recommendations for where I can get rear windows installed in/near Cardiff, tempted to do it myself but don’t want them to fall out halfway down the motorway...
Tiny tiny small leak coming through, it was a huge storm outside and it’s the first time I’ve seen it. The small hole where the sealant didn’t get to must be letting the rain through. Any small sealant I can use from the outside to get behind the glass?
So then, im just about to cut some nice holes in my T6 and having watched loads of videos it seems you can either use a rubber seal on the cut edges or carpet and tuck it in behind the glass from the inside. Whats the best option. Rubber seam looks way easier??
Afternoon all. I’ve just fitted a window from camper glass and noticed that the curvature from top to bottom seems quite off compared to the vehicle body. Mainly the rear bottom corner of the window seems to be away from the body by quite a bit. I’m just wondering if this normal? TIA
Hi,
Having recently purchased a T6 PV, I am hoping to complete a lot of the campervan conversion work myself including the window hole cutting, carpet trimming and fitting the window rubber trim but thought it may be best to get an expert to do the final task of fitting the actual windows to...
Hi guys
I need a couple of windows fitting on my van (one new, so van to be cut out and fitted and the other a replacement)
Can anyone recommend any places that do things
thanks
Aaron
Hi all. After a bit of help if possible please...
I've fitted my driver side Window today and just been outside and noticed it leaking from the top sealing bead of the window. I fitted the other side last week and had no problems like this and followed the exact same process.
Is it a case of...
So we've had our campervan for just over 2 years and weve decided that one thing we don't have but would really like is a window at the rear on the passanger side. On the outside of the van at tge rear passanger side is a glass panel. Taking the glass panel off is no problem and taking out the...
Hi ya,
I am going to be putting in new windows round the van eventually and have done my due diligence and watched all the YouTube vids on the subject so feel pretty ok on it all but I have 2 queries.
1) on my T6 van the dip in the inside skin is quite significant where the central bar is that...
Hi guys,
Totally new to this. I’m hoping someone can help me with the bit of a hash up I’ve made of installing the windows on my T5.
I’ll go through the basics of what I’ve done and the problem I’ve had.
First time of doing this (no chance of a rehearsal!). Started with the left back barn door...
I need to purchase and install sliding windows on my Shuttle.
many recommendations for supply and fit or just fitting in and around West London?
Thanks
Mark
I have a set of OEM windows from a shuttle that I plan to fit to my panel van.
Having never done it before, how ‘clean’ a surface on the inside of the window do I need? The glass I have still has the remains of the rubber? Adhesive on it. Have started taking it off with a knife but don’t want...
Hi All,
I am selecting windows to fit to a swb panel T6 and really like the flush fit sliders from VGC. Can anyone advise how prone to leaks these particular windows are as I know the older OEM flush sliders were leaky.
If there is mention of VGC slider leaks my back up plan is indented sliders...
Hi, we got our T6 Panel last week so looking at windows first (I understand some say lining first then windows, others say it doesn’t make much difference). We have looked at the option of diy with the windows, and there are some great ‘how to” videos on YouTub, but if anyone has any experience...
Hi I’m looking for any advice on what to use to seal the top of my my sliding door window .. on the outside . I’ve done as good a job as I can improving the dogs dinner of a job whoever originally converted my t6 and most problems are solved however I’ve got water coming in the sliding door...
I have just smashed my side window by accident , i was adjusting the lower bracket on the sliding door..my alignment must have been slightly out and when i shut the door, i think the sliding door panel caught the edge of the glass on the rear quarter !!!
Never mind theres worse things going on...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.