vcds

Greetings. Would anyone know of someone who can help us to swap steering whee over and add a wire to bcm / code for a basic MFW near any of the following areas please? Bristol Swindon Bath Reading Oxford Thank you :)

I have VCDS that I use on another VAG vehicle and was able to make adjustments to some parameters that the stop/start function operates; essentially changing the temperature range so stop/start will only work when the ambient temperature is between 49-50 degrees. In my region it rarely gets that...

Just wondering if anyone has derestricted there peppermint green van if it came from fps, if so how did you go about It, was it restricted by ecu or by a fitted box somewhere? Thanks Dan

Looking to fit a reversing camera to my T6. If I get the VCDS coding done before actually fitting the camera will it cause any major issues? Assuming it'll throw up errors whilst it's not connected properly, but are there any other reasons for not doing the config before the actual install...

Hi Don't normally post stuff, however after some assistance, had a new t6.1 back in March with tow prep, just had a towbar and the electics fitted. Now I have just contacted the local steelers VW @ Indian queens to enquire about having the van coded, only to be told that I needed a special...

Ok so I have a T5.1 with barn doors central locking via remote fob (or key) works fine including the barn doors I have fitted the switch to lock the doors in the drivers door but when I press it is locks the door and then just unlocks it again. same thing happens doors lock and unlock...

How many of you guys out there using the iOS version of OBD11? I’d prefer Vcds, but i Haven’t used a windows based PC in 14 years and don’t really Want to go and get a a cheap laptop/Tablet just to run VCDS. So that leaves me with OBD11 that I can run on my iPad Pro or my iPhon. anyone happy...

Hi guys I’ve just bought a T6 and would really like to get the large speedo mod done to my instrument cluster. Is there anyone with VCDS in the Norwich area able to help with this please? Cheers!

I checked here https://www.t6forum.com/threads/vcds-north-west-area.8173/ But is there anyone in the mid-cheshire (Crewe/Northwich) area with VCDS as need a few changes making to my T5 (2013) - prepared to travel a little way. Thanks

Just checking an old laptop case and discovered a Ross tech VCDS interface, i had completely forgotten i bought one! Its a genuine one i bought from Gendan i think back in 2014. Only been used to scan my wife’s old Passat. Anybody know if i can use this on my T6.1? I’m guessing not because it...

Hello! Just fitted a front upgrade parking sensor kit, from car systems.. along with replacing the original radio unit with a discover media unit. Currently having trouble getting the parking sensor range display on the screen, with the vehicle in reverse. I’ve refitted the original unit and...

I am trying to activate TPMS, the big speedo and tear wipe, auto locking and unlock on a T6.1 however it seems different to the "How I Did" it threads that I have been looking at. Are there different guides to let me do this please? Thanks

Hi, do you know if on the T6.1 the two options of: Tyre pressure monitoring system. Visual display of each tyre pressure is shown in the Multi-function display. Traffic Sign Recognition Can be activated in VCDS please?

Genuine VCDS cable FOR SALE Unlimited VIN version Will work on any VAG car up to 2015 £250 ono Located in Manchester

For some reason my RH drive van is not coded for RH drive. I've not coded it yet, but will it make a difference, and why wouldn’t it be coded as RH drive? Thanks

Has anyone got an older exe they can share. Anything 18. Or 19. Would do.

What's recommended to prevent battery drain when using VCDS.... I've been pointed in the direction of one of these.... RSCPR50 But not cheap and wondered what alternatives people have used or recommend.

So a couple of weeks ago I did a full auto scan and got:- Address 01: Engine (J623-CXEC) Labels:. 04L-907-309-V2.clb Part No SW: 04L 906 056 LR HW: 04L 907 445 A Component: R4 2.0l BTD H03 9776 Revision: 23101001 Coding: 0025401C430401080000 Shop #: WSC 00012 790...

Hi all I’m looking to do the MFSW mod soon, and need to do some coding. I’m looking to hire the group cable to do this. I know what to code, or have it written down. My issue is navigating the software and not arsing it up. Basics like taking a scan and storing it, then being able to revert it...

In March 2020 finally got the long-awaited ECU (Engine Control Unit) software update. Unfortunately it took a while to get a good chance to do some measurements to try to figure out what has been changed. So finally a few weeks back dusted the VCDS and collected all kind of intriguing data. The...