vcds

Has anyone got an older exe they can share. Anything 18. Or 19. Would do.

What's recommended to prevent battery drain when using VCDS.... I've been pointed in the direction of one of these.... RSCPR50 But not cheap and wondered what alternatives people have used or recommend.

So a couple of weeks ago I did a full auto scan and got:- Address 01: Engine (J623-CXEC) Labels:. 04L-907-309-V2.clb Part No SW: 04L 906 056 LR HW: 04L 907 445 A Component: R4 2.0l BTD H03 9776 Revision: 23101001 Coding: 0025401C430401080000 Shop #: WSC 00012 790...

Hi all I’m looking to do the MFSW mod soon, and need to do some coding. I’m looking to hire the group cable to do this. I know what to code, or have it written down. My issue is navigating the software and not arsing it up. Basics like taking a scan and storing it, then being able to revert it...

In March 2020 finally got the long-awaited ECU (Engine Control Unit) software update. Unfortunately it took a while to get a good chance to do some measurements to try to figure out what has been changed. So finally a few weeks back dusted the VCDS and collected all kind of intriguing data. The...

Hi there. We have a T5.1 highline. I am not quite sure how to explain this but we have a small light fitted in the step of the sliding door. It is great when getting in and out of the van so I am not keen to get rid of it... however, it stays on if we leave the door open (during cooking or...

Hi all, Im looking to change my leisure batteries on T6 calif 2016. (I have don't check what model are installed currently) Do I need to code them into vcds ? Can I upgrade to 100ah for exemple without risk for battery charger? Some advices ? I saw only one battery information into vcds so...

Hi all, looking for a vcds guru in york, Yorkshire area, would like dial sweep, teardrop wipe, mph in mfd, locking on drive off and a few oth Could become addictive Or a point in the right direction to get the software and do it my self

Good morning all, I own a Multivan T6 from 2017 Here is my problem: Two or 3 years ago I bought a rosstech cable (18.1.0 to 20 pounds). In order to avoid going to touch 5 or 6 boxes the first time, I decided to try to activate the comfort box with the automatic closing and opening of the doors...

Hi Gents, Could someone tell me step by step how to perform a BCM flash with VCP? I got the file and I know I need constant voltage above 12v and that is it I know. i am a new VCP user and did not find instructions in the documentation regarding the BCM flash.

Trying to understand these IDE Codes How do you read them in VDCS or am i missing the boat entirely I'd like to do these mods: Electric Tailgate close from keyfob: taken from this post Retrofitting powered Tailgate??? High Beam Assist active from 12MPH from default taken from this post High...

Hi, has anyone vcds in / near Northampton that can code in my freshly fitted tow Bar? Much appreciated...

I'm looking for someone to adapt my T6 to use with mains power. I've currently got a leisure battery but want to be able to hook up to mains. Can anyone recommend someone within an hour of London? Thanks in advance, Andy

Hello guys I've followed the forum advice and run a scan on my T6, apart from the airbag error, (which is of my own making) I have 5 engine warnings. Are the fuel related ones because the engine isn't running? The MAF sensor is listed an 'intermittent' and the barometric sensor as 'malfunction'...

I fitted my own tow bar and VW wanted too much money to program it. It's the Westfalia with OEM electrics from PF Jones. I'm just about to receive my VCDS unit and want to make sure that I don't need the tow bar prep to enable the features via the programming. I hate the reversing sensors...

I ordered the VCDS unit yesterday, it’s been packed and on its way - here’s the email from Gendan, made me smile; Your product has been gently taken from our shelves with soft cotton gloves and placed on a cushion for its journey to the packing area. A team of 4 packers thoroughly inspected...

Evening folks, you've probably heard it before. New to the scene & recently got the camper that we've always wanted, start line, fully converted & we love it to bits, a downside though is not being able to see the mph in big numbers on the display! & I believe you need some electronic/computer...

Hello all, I've fitted H7 to my panel van that left the factory with H4's. Everything works as it should except the DRL's. Coded BYTE 22, BIT 2 = 0 (low beam forced off while high beam on). I've tested the bulb - it works. I've powered the bulb when in the headlight - it works. The only other...

Anyone any idea if I connect rear speakers, whether the standard head unit (Nav version), will allow front/rear balance control?

Dose anyone know how to code so dipped lights stay on when in main beam.