AT6 OYEH! Reflex Silver T6 SWB Kombi with added ABT

Lights in last evening, the bulb warning was triggered because I had disconnected the foglights…..:D:D

Didn’t drive it in the dark because a) I couldn’t be bothered and b) I still had the wheels off as I had to fit a set of brake pads.
There was still a bit of life left in the old ones, I reckon I could have got away with that for at least another 2,000 miles!

I bought a set of these back in March:

IMG_4827.webp

For £56 they came with a set of Febi wear sensors. The red anti-squeal plates mean they are just too thick to fit inside the caliper, so I removed them to install.
After slowing from 30 to 0 twice, they felt really strong. I’ve done some light bedding in with some harder breaking, but feel so far is pretty good.

I wouldn’t normally scrimp on a set of pads as they are all about the same price. The Brembo pads that came off produce a LOT of dust.


IMG_4828.webp

I’ve read some stuff recently about Kinetix products and they generally get a good write up. Being ceramic, I hope they do actually produce less dust.

I might see what the lights are like in the dark this evening.

I couldn’t even be bothered to take a pic once I’d finished. So here’s one through the window.


IMG_4825.webp

I’m sitting in the garden and the gate is open but I can’t be bothered to get up and go and take a photo…
 
  • Like
Reactions: CAB
Back
Top