Hi all
I have a Roamer 120ah lithium battery installed under the drivers seat with two charging options - the first is a Victron charger connected to my mains hookup, and the second is the ABSO 50ah DC-DC charger connected to a solar panel and the starter battery.
The Victron charger works...
...Have a very old VSR which I dont think works at all.
I realized that you can not just hope to use Solar all the time and you do need a DCtoDC charger.
To help to keep the batters toped up.
So the question is what make / model DCDC charger I should be looking at that is either fully...
Morning all. I've bought a Anker Solix power bank. On the standard 12v Cig lighter it takes for ever to charge up. Has anyone done a DctoDC charging set up ?
Thanks
Hi there, I'm looking for some advise what is going on with my connections i.e.:
I have finished installation yesterday with renogy dc-dc/mppt 50A to my fogstar 230Ah. See below diagram
And everything worked i.e. including load however, I decided to leave victron charger on to recharge LB and 4...
Hey guys I'm about to start fitting a renogy DCtoDC there's something I don't really understand. It seems to be recommended to run a negative cable from starter battery along with positive so not using an earth point. I'm happy to run the cable but was wondering if it's beneficial.
Any help would be greatly appreciated with the below
Am just wondering if anyone has come across this issue before with a DC-DC charger. I first thought it was a faulty unit (CTEK 250SE) so changed to the RENOGY DCC50S but am still having the same issue.
When the wire from the alternator is...
Evening,
Started to plan a leisure battery under the passenger seat in my Kombi..
The plan is a
Victron Orion-Tr Smart 12/12-18A Isolated DC-DC charger
There is a feed from the battery (16mm by the looks of it) under the passenger seat from the battery already....
Question is: Charger...
I collected my 2017 T6 from the converters the other day & there are a few issues with the leisure battery setup. I knew it was a basic setup using a PMS3 & Dc-Dc charger but it suits my needs at least for now as I’ll mostly be using EHU
main issues are the Victron Orion Dc/Dc charger doesn’t...
Hi All, I'm a new member to this forum and my problem is how to pick up a suitable engine run signal to activate the DCtoDC charger. A couple of members suggested a new post but they did say that I could pick up a 12 v o/p from the central fuse box. However I have no idea which fuse and how I...
Hi all.
Just looking to purchase a Flexi solar panel from eBay for my renogy 50 dctodc , apparently mine is a new version, which supports better solar input.
Can anyone suggest if there will be an issue with me fitting the 200w panel
Hello everyone!
Just wondering how to go about adding an inverter to our T6.
Current setup has Victron Orion tr-smart DC/DC converter and a solar charge controller connected to leisure battery, usual EHU connected to fused consumer unit with Sargent PF200 switching Battery Charger and two...
Hi guys, I’m just wiring in my victron tr smart dctodc charger in my 2017 transporter.
I’m happy with all the wiring apart from the green L/H terminal. It comes bridged in the box , I’m sure I have seen somewhere people taking the bridge out and wiring it to the fuse box …… do I just leave it...
[Guide] Renogy IP67 50A DC-DC Charger + MPPT (for leisure battery) -- How We Done It --
..
with thanks to a Forum Member for buying this for himself, but sending it to me first to test it out.
we have the new
..
RENOGY IP67 50A DC-DC Battery Charger with MPPT
RENOGY 12V/24V IP67 50A...
Just wondering how many people have a solar power isolation switch fitted to their system?
Something like this:
https://www.windandsun.co.uk/products/krauss-naimer-dc-isolation-switches
Also was your system self fit or not?
Trying to decide whether to fit on or not?
I have a renogy 50ah lithium battery that is not accepting a charge. I have spent a lot of time (frustrating hours) on webchat with Renogy. They are now suggesting that I buy a Lithium charger with re-activation capability. They have one on their website but they asking £129 for it!.
I spent...
This Ctek D250SA DC / DC charger (with built in MPPT Solar Controller) was removed from my van when I upgraded to a Renogy LifePo4 battery last year. It was installed for three years before I swapped it with the very similar (but Lithium compatible) D250SE. It's in full working order with no...
Under my passenger seat I have what looks to be a 10mmsq cable which I’m lead to believe can be used for a DC-DC charger, negative coming from chassis.
I was originally thinking of a Victron 12/12/30 unit which would be mounted in a cupboard I intend to make and located under the non sliding...
...I would like to fit under the drivers seat a lithium 100ah lifepo4 battery ( which may have to go on its side) alongside a victron 12/12/30 dctodc charger (remove the vsr) but leave in situ the solar system and my mains hook up system. Will this work or should I swap out everything I...
Just Installed the Renogy 50a dc-dc charger under passenger seat and pretty much done but now need i to connect the red ignition live wire from charger to an ign live, for the smart alternator. T6 2018
I’ve looked and found a relevant post regards tapping into fuse box under gear lever in cab...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.