EPB Retrofit ... the way to Stop & Go

[Shadow109]

yes, that's what I need for a T6.1

56D907801 This unit is not compatible with T6.1
T6.1 have MQB platform
And this unit is made for pq25 platform (T5.1 and T6)

 

[Dorfheiko]

Oh okay. Which one would fit there? Is there a car with a separate control unit in the mqb platform? Or does it all work via the abs?

 

[gymon]

First part arrived. I stating do have dummy question, where to put all this unit? Under driver seat? I ordered main unit from aliexpert and I’m still crossing my fingers that will working.

There is any way to check that module on desk?

How to check if that will working with my ABS? Unlucky I have that version that was mentioned as not support ACC and that was as well my idea to make that retrofit.

 

[dnoermann]

All T6 Abs work with ACC. That Information from my older Posts where wrong.
On Desk you can apply 12V and connect Can Bus to VCDS/VCP/ODIS and detect the Module.
You only need to add Can Termination in such a setup.

 

[gymon]

I just received package from my friend, it’s look quiet nice. Maybe at the evening I will give a try to connect o to vcds

 

[pellizzoni]

E finalmente meu primeiro lote de controladores EPB chegou.
Desta vez, um VW novo e genuíno, fabricado pela TRW.
Totalmente funcional e funcionando.
Já testado em bancada e no veículo :afirmativo:.
Também com o envolvimento de @dnoermann
verificamos a compatibilidade do BCM e esses módulos funcionam com todas as revisões de
BCM PQ25 Max4 7E0 937 090 (sem letra/B/C/D) .

View attachment 109908
View attachment 109909
View attachment 109910

Você Usando a Unidade 56D você sabe me dizer o que é alimentação do terminal 15 e o que é alimentação do terminal 30?

 

[pellizzoni]

E finalmente meu primeiro lote de controladores EPB chegou.
Desta vez, um VW novo e genuíno, fabricado pela TRW.
Totalmente funcional e funcionando.
Já testado em bancada e no veículo :afirmativo:.
Também com o envolvimento de @dnoermann
verificamos a compatibilidade do BCM e esses módulos funcionam com todas as revisões de
BCM PQ25 Max4 7E0 937 090 (sem letra/B/C/D) .

View attachment 109908
View attachment 109909
View attachment 109910

Usando a Unidade 56D, você pode me dizer qual é a fonte de alimentação para o terminal 15 e qual é a fonte de alimentação para o terminal 30?

 

[Snakelimit]

Just
“Using Unit 56D, can you tell me which is the power supply for terminal 15 and which is the power supply for terminal 30?”

 

[Snakelimit]

Usando a Unidade 56D, você pode me dizer qual é a fonte de alimentação para o terminal 15 e qual é a fonte de alimentação para o terminal 30?

Please send questions in English as that main language here

 

[pellizzoni]

Please send questions in English as that main language here

ok “Using Unit 56D, can you tell me which is the power supply for terminal 15 and which is the power supply for terminal 30?”

 

[Snakelimit]

ok “Using Unit 56D, can you tell me which is the power supply for terminal 15 and which is the power supply for terminal 30?”

@Robert might be able to tell you

 

[Robert]

ok “Using Unit 56D, can you tell me which is the power supply for terminal 15 and which is the power supply for terminal 30?”

For 56D EPB controller:
Terminal 15 -> PIN 22
Terminal 30 -> PIN 13 & PIN 15
Terminal 31 -> PIN 28 & PIN 30

 

[pellizzoni]

For 56D EPB controller:
Terminal 15 -> PIN 22
Terminal 30 -> PIN 13 & PIN 15
Terminal 31 -> PIN 28 & PIN 30

Thank you very much! I still have a question about the activation key. I'm using the 56D-927-225 where pin 7 and pin 11 are power. If you have the information about which is terminal 15 and which is terminal 30, I would appreciate it.

 

[Robert]

Thank you very much! I still have a question about the activation key. I'm using the 56D-927-225 where pin 7 and pin 11 are power. If you have the information about which is terminal 15 and which is terminal 30, I would appreciate it.

For 56D EPB switch:
Terminal 15 -> PIN 11
Terminal 30 -> PIN 7
Terminal 31 -> PIN 6