It should be really simple? Is it?

[Shovelhandz]

Hello everyone
This is a power connector for a rear view mirror display come dash cam recorder. I thought it would be simple to just plug it in and find an appropriate earthing position.
I have paid for the vip membership for the fuse board diagram but still I'm hesitant to plug bits in. Am I over complicating it?
The red wire is ignition live and the yellow is permanent live. Would someone be kind enough to put me out of my misery and advise which slots to pop it in please?

 

[Dellmassive]

lower dash fuse box.

centre line is IGNITION.

left/right rows are PERM supply.

make sure the fuse-tap is installed the correct way - test by removing the blade fuse to make sure the feed drops out.

 

[Dellmassive]

T6 - Fuse Card

Reference chart for T6 Fuses.

www.t6forum.com

 

[Shovelhandz]

lower dash fuse box.

centre line is IGNITION.

left/right rows are PERM supply.

make sure the fuse-tap is installed the correct way - test by removing the blade fuse to make sure the feed drops out.

Thank you !
How do you mean left right rows?

 

[Dellmassive]

Thats a T6.1 then? . . . Not a T6.

Different fuse box.

Have a look in the downloads for the T6.1 fusebox diagrams.