seat base

I've lowered the handbrake to accommodate swivel bases on both front seats. In the process I did a butcher's job on the cover and now it's time to tidy it up. Does anyone know where I can find a new cover for a lowered handbrake?

Pic for clarity. Anyone used them? How strong is the magnet? I don't want them falling off under normal use! I think I'll be able to get the Erberspacher outlet to look nicer than i can using the OEM plastic jobby.

Fitting RIB offset swivels and want to keep the seats as low as possible so I am modifying the handbrake bracket so that I don’t have to fit the spacers that came with the RIB swivels. No problem drilling out the original spotwelds and grinding off the short weld on the back corner of the...

I have no idea how this lot is going to fit under the seat along with the biggest battery I can get my hands on OK, so I only need the DC-DC and 240 breaker under there, picture for sheer pleasure of seeing all that wonderful Victron kit together:D As I see it there needs to be a plate made...

I've just brought a single seat for the passenger's side but it didn't come with a base. Does anyone have one going spare? Are they the same as the drivers side? Thanks Duncan

Never been used Kiravan all in one single seat safe base in shiny black, with 2 keys, perfect nick, £190 new, make me a sensible offer!

Hello, Been a while since i've last posted but was wondering if i could ask advice. Im thinking of doing a heater install DIY, looking at airtop2000..differences between Web/Eber seem minimal.. We have a LHD T6 lwb with slider on the RHS of the vehicule. Awning will therefore be on the RHS...

I'm just about to install a leoch 130 agm under the drivers seat of my T6. There is all the usual split charger, 12v charger and 240 distribution to squeeze in too. I've been playing about with ideas before fitting and its looking extremely tight! Has anyone done this and can offer pointers on...

Hi has anyone got any pictures of these fitted to your van preferably if you have a solution with a leisure battery and swivel seats thanks in advance

Looking to fit swivel to the drivers seat and double passenger seat. I dont like the rib single seat swivel as the mechanism is on the side and seems to foul the seat plastics at its lowest setting. Any recommendations for a swivel mechanism that has the operating lever at either the front or...

Hi does anyone know where or how to get a lower seat base for a swivel seat? Just bought one from Jennings very heavy bit of kit says it lowers the seat by 30mm but upon fitting it really does not seem to make the much difference. I can't let my wife drive as I hate sitting so high up nearly...

For Sale: Passengers front seat base, plus slider/adjuster mechanism. Cash only, collect in person from Bournemouth. Make me an offer.

Hi Folks, I'm changing my double bench seat with swivel to a single with swivel. Bought the single seat without a base, bought the swivel with safe unit, both are on route but I've no bolts to attach the two together, :(:( Does anyone know what size they are ? Thanks

Does anyone have anything in this blank panel show below? What does VW fit here? Looks like it’d be prime for a USB or 12v socket.

We have been asked over the last 2 years to come up with a active sub enclosure based on our hugely popular passive enclosure, It comes in 2 power outputs, 300w and 500w and with a dash board bass remote. It can run off factory and aftermarket head units Complete with all power cables and...

hi, I've been considering putting both driver and double passenger seat on swivels from Kiravans. I read in the details that there is a height gain of 47mm on the passenger seat and 43mm on the drivers seat. Has anyone found this to be a problem? Are there any alternatives or workarounds which...

I have a June 2018 150 DSG Kombi edition with a pretty basic seat on the passenger side, it doesn’t have height adjustment or armrests even though these are std spec on this van (apparently there was a glitch in the order system where dealers thought they were adding adjustment and arm rests but...

I’ve currently got a single-passenger seat base with the built-in battery tray. My leisure battery doesn’t fit the tray (a little too wide so I’ve put the DC-DC charger there) and the tray is restricting room, hence the offer of a swap. Does anyone with a single passenger seat wish to swap...

Drivers seat base complete with all parts as you can see. Good clean condition came from a low mileage 66plate. £90 collection from near york. If not p&p would be £15.00 to uk mainland 371AC942-FFA0-41CE-B6E2-B83929439E82 by Jack T posted 26 Aug 2018 at 14:31...

Bought this when playing with a few ideas for seat setups. This is a passenger side. This base is 30mm lower than a standard base to allow for a swivel. The bottom bolt holes are predrilled but the top would require drilling to your swivel base dimensions. Link of website purchase from: VW T5...