ply

Hello All, Just after some advice and peoples past experience. I am about to carpet the new van. I am lining the metal work separate to the boards. I have no intention of turning it into a full camper, so no need for structure to hang units etc. So will i be fine just to use the original...

hi guys , I bought some ply lining for a T6 - some of the panels fit fine but the larger full side rear ones don’t come close - the shape is fine however all the pre drilled holes don’t match up. The panel has holes for the top and sides where the only holes my van has are on the lower side...

I'm just starting to think about the roof panel for my van. I was thinking about a 1 piece 3..6mm ply roof, but have been told by a converter that the hidden clips from places like MVM or Harrisons wont be good enough the support the weight, especially by the time its carpeted and got LED lights...

So my van was lined etc by NEWWAVE in 2018 and I'm very happy with it....but I still find there's a lot of road / tyre noise and I'd like to tackle it. One area that I think may be the issue is the floor. It's currently standard VW rubber flooring and I'm thinking this needs to be replaced with...

Side panels, wheel arch door panels (approx 7mm) and floor (approx 10mm). Also includes the thin grey factory panels that affix tight underneath to the metal work. There is also a big section of this for the roof if needed. Includes all fittings. Self-tapping screws etc All in excellent...

Has anyone else purchased pre cut plywood panels? Just trying to fit the ones I bought months ago and pretty much none of the holes line up. Not impressed, as I used a hot glue gun to stick the hidden fasteners in. Lucky I tested them before carpeting. When I say the holes don’t line up, I...

Hi all, Any thoughts on which hidden clips are best for 3.6mm ply panels. The choice seems to be between MVM and Harrison. I know Harrison fit standard holes and MVM use a smaller hole. Just wondered what people have found work best.

VW T5/T6 Camper Van Door Cards / Interior Panels 3.6mm Ply Trim Kit Does anyone want these thin panels.. also the seat belts.. tried to sell on ebay and didn't get much interest.. VW T5/T6 Camper Van Door Cards / Interior Panels 3.6mm Ply Trim Kit | eBay Thanks, Vince

A little while ago I was chatting to @Pauly and he asked if we would be interested in putting together a thread outlining how to go about lining your own van. Up until recently I have been so busy with work and home stuff that I haven't had a chance to do a thing about it and with another baby...

Does anyone know where I can get the ply ready cut (3.6mm) with the holes in the correct place so that I can put in the hidden fixings? I see a lot of panels but I don’t see holes! Just wondering how the hidden clips work? Seems like it could be a real faff trying to work out where they would go...

After removing the bulkhead there is a gap between the cab headlining and the rear rood lining. So I'm going to get some ply roof. Question is do I go with the same 2 piece layout as OOEM or just get a 1 piece roof? Any advantages / disadvantages? Thanks

When installing Cali single rails in a kombi with single left sliding door, what thickness floor matches the rail height? I was looking to cover the ply with a coin rubber pattern like the California has. E.g Black ROUND STUDDED Penny Van Garage Workshop Rubber Flooring Matting 1.5m x 3mm |...

I have glued 9mm batons to the floor of my van. I now need to put the 12mm ply floor down. I was planning on screws, but 2 converters I spoke to both recommended sikaflex and said the never screw the floor down. Looking for peoples opinions on this. Thanks

hi i have a few brand new ply floorings swb lwb ans twin door swb plus door panels ect floors £50 swb £60 lwb ,, door / window panels £10,, PICK UP ONLY ,NORTHEAST /DURHAM/PETERLEE area Thanks

First a bit of background. I have toyed with the idea of swapping my car for a van for a number of years. Firstly as a way of transporting my track bike and gear in stead of a car/trailer. Also giving me the option of sleeping overnight at the track. The swapping of the trackbike to a trail bike...

Must be External or Marine Ply Seen a company that do them for £35 but only SWB T5/T6 FloorPacker Set SWB – blueskyconversions Collection or shipping depending on location (I live in Dorset) Thanks

Guys, local converter is saying the ply panels will warp when in heat during summer months. Especially with me having a black van.., I've bought the ply now from eBay, it’ll cost me to send back... is it actually better than the standard kombi panels ?! He’s saying he uses them... he has a good...

Hi family is growing so needing to convert my van to a kombi, going for seats this weekend and now looking forward further to insulation and carpeting, I’m also guessing I would have to get the windows fitted before the carpeting stage. I have a panel van ply kit but would I need to buy a kombi...

What’s the best option here, for the side panels and roof of the van... I was first thinking 6mm as it means I have more fixing strength when it comes to screwing things into it... however my mate has what seems to be 3.6 and it looks sleek!