Great tyres..
tested them out during winter, did the job.
What Have You Done To Your Van Today?
- Thread starter Daneeyre
- Start date
-
- Tags
- mod modification mods retrofit
tested them out during winter, did the job.
If it's a T32...awesome..
been quoted £550 for 40mm Eibach springs fitted. That's my next gig.. just shelled out £1100 for a DMF/Flywheel
https://www.ebay.co.uk/itm/178050618881
Currently pitched up in Noordwijkerhou, Netherlands, we watched our German neighbour struggling pumping up his inflatable sofa with a stirrup pump.
In the interests of international relations, I lent him my airbeam pump, 2 minutes, job done. Very useful/lazy gadget!
cheers dude.. though don't want a full suspension kit, only want Springs, top mounts & rubbers.
I was hoping you'd got a T32 as that's a bargain.
I've got H&R coil overs from Steve @CRS Performance and already had the thicker H&R ARBs, not knocking shorter springs but it's the shock absorbers that decide the ride quality.
I've got H&R coil overs from Steve @CRS Performance and already had the thicker H&R ARBs, not knocking shorter springs but it's the shock absorbers that decide the ride quality.
Removed my Rock n Roll seals and replaced with a RIB, not a small task on your own. What I will say is barely any of the pre drilled holes worked well and had to use blind bolts in some circumstances.
So far feels like a lot more storage room and more comfortable to sit in. Also being able to elevate the back when made up in to a bed is great.
So far feels like a lot more storage room and more comfortable to sit in. Also being able to elevate the back when made up in to a bed is great.
it is a T32.. use it as a daily, only want the springs for better cornering & on roundabouts.. less rollI was hoping you'd got a T32 as that's a bargain.
I've got H&R coil overs from Steve @CRS Performance and already had the thicker H&R ARBs, not knocking shorter springs but it's the shock absorbers that decide the ride quality.
Good job there bud.
prev had a 5.1 with a RnR bed... big difference with the RIB - the back, underneath & on the bed in mine is stored up with all my gear - a mattress topper as well
Another Goodyear Eagle F1 tyre needed
Pissed right off barely done 800 miles on new one then found a screw in it of course unrepairable
The joys of working on site
...or next door to a joiner who doesn't feckin' clear up after himself!The joys of working on site
Any good? Was thinking about buy before go to Spain
Sometimes it's the tiny little things ... I have the rear seatbelts in mine so it can go back to Kombi any time I want (very rare) but they're a bit flappy and annoy me slightly.
Stuck a magnet behind the belt, so my pluggy inny bit sticks to the wall. No more flappy
Stuck a magnet behind the belt, so my pluggy inny bit sticks to the wall. No more flappy
Flushed out the water tank of sterilising fluid. Now about a third full of fresh water which will slosh about andnkeep things clean, and will get swapped out every fortnight. If I go camping ill refullmit afresh and boil any drinking water anyway.
Its not until you get and use a campervan that you find what setup suits each person, In our first year i have not used the underslung water tank, hob or sink, used the microwave once to warm a packet of peppercorn sauce which i could have warmed in a pan
Same boat here! I've a 70ltr underslung tank, and it looks like its never really been used. Don't think I'll be using it to drink from anyway. But decided to keep it as like the idea of putting in a rear shower to rinse my mountain bike / wetsuit / stuff like that. Just another thing to get around too!
great idea, any magnet in particular? I'm going to shamelessly copy if you don't mind!Sometimes it's the tiny little things ... I have the rear seatbelts in mine so it can go back to Kombi any time I want (very rare) but they're a bit flappy and annoy me slightly.
Stuck a magnet behind the belt, so my pluggy inny bit sticks to the wall. No more flappy
View attachment 327326
Glad you like it! Only £2.99 licensing rights via PayPal to [email protected] please
I thinks it's a 20mm dia round, 2mm thick Neodymium magnetty thing. Just needs to be strong enough to go through one layer of carpet and two layers of seat belt.
