For the flooring you can put some 9mm packing pieces in the low points to level out first before you insulate and ply.
What Have You Done To Your Van Today?
- Thread starter Daneeyre
- Start date
-
- Tags
- mod modification mods retrofit
Been meaning to do this for a little while… fitted a new bumper protector.. took about 2 hours by the time I removed the sticky stuff from the old one! What a ball aching patience testing job!
Took off the old protector, washed, got rid of the sticky stuff, found it better to peel from front to back.. wash, clay bar, ceramic coat then fit the new protector..
Once that was done, fitted the fridge sticker from fridgestickers.com easy enough to do..
cuppa time
Took off the old protector, washed, got rid of the sticky stuff, found it better to peel from front to back.. wash, clay bar, ceramic coat then fit the new protector..
Once that was done, fitted the fridge sticker from fridgestickers.com easy enough to do..
cuppa time
Last edited:
Toby Dixon
Member
Do they not pass ? Their website says they do
As I'm starting to covert the van, T6.1 I've fitted one side of a pair of roof rails. Got them from Vanstyle. Now I have fitted a few of these on various vans over the years but these are the worst. Never had a problem with Vanstyle kit before. The plastic spacers needed the holes for the bolts to be enlarged as the seals on the rails wouldn't marry up with bolts stopping alignment, really hot and filing away. An hour total job spread to 90 minutes one side so same again tomorrow. At least the door protector, the whole length will be a welcome easy job.
Another busy day was today
Sorted a lot of and still lots left to do before Wednesday
night heater sorted and working as should dc-dc charger as well
Sorted at last wife seat now she can turn around needed to cut a bit of track and other modifications to adapters to make it work
Connected hose to tank for filling up need find now way to get it up any ideas?
Sorted a lot of and still lots left to do before Wednesday
night heater sorted and working as should dc-dc charger as well
Sorted at last wife seat now she can turn around needed to cut a bit of track and other modifications to adapters to make it work
Connected hose to tank for filling up need find now way to get it up any ideas?
Toby Dixon
Member
Nice ....how much to make me one with same colour ?Made a shelf for the over cab poptop space. A couple of ikea 33cm square collapsible boxes for cloths etc and we'll be sortedView attachment 293766View attachment 293762View attachment 293762View attachment 293762View attachment 293763View attachment 293765
View attachment 293764
My van has an Austops roof so I made it to fit the frame size and strap positions. If your roof isn't an Austops one a duplicate of the shelf I've made probably won't fit your van. I'm sure I could make one if I had the dimensions of the space above the cab and strap position in your van. Material cost is approx £45. 3 to 4 hours start to finish so approximately £40 of my time. Due to the size of the shelf I'm guessing £15 carriage. Alternatively you could collect. I'm near Leeds.
Toby Dixon
Member
Wow I'm in Kippax Leeds maybe a future plan cheers
No worries. I'm on here if and when you're ready
F@!king genius. Why have I not done this yet?
I Like those. Do you have a link, and any pics of the way that they are fitted?
Thanks
they probably would but our mot's Government run over here so haven't chanced it
