What Have You Done To Your Van Today?

Got round to making a fillet piece to close off the gap down the back of this cabinet and to stop me losing my snacks down the back of it and finding them in the gas cupboard!

Used an offcut of lightweight ply from a forum member and the scrap of carpet I took off my door card when I fitted the Loc8 table. Just cost me 69p for some connector blocks from Screwfix!

8F55435D-A340-4C5A-BAB9-5ABA10958FDC.jpeg

377E349A-DFEF-494F-96F0-316DFD5C2079.jpeg
 
Shredder said:
Got this leather T6 seat storage / organiser from INKA today, so put that on the back of the seat as designed. That was a big 30 second job anyway :D

Absolutely great bit of kit. Handy for all sorts of things you never even thought about till you got it. Also very happy it was designed AND made in Britain. Very nice quality. Super thick leather. Looks a bit 'grey' coloured in fitted photo but that was just the camera flash. It's actually a nice black as per pic of it on floor (there is a grey coloured option)

Thanks to @Siperrin @Lord Mfwic and @Insert Coin for pointing this little accessory out and their feedback. I'm amazed after 2 years of ownership I hadn't spotted these. A lot of usefulness for the money for sure :thumbsup:

www.inka-corp.com

Inka VW Transporter Seatstor Seat Storage Pockets, Tool Tidy Organiser

Inka VW Transporter Seatstor Seat Storage Pockets, Tool Tidy Organiser T6 or T5, Black Seat Tidy Organiser Seatstor Pocket VinylPart of the "INKA" Second Skin Executive Range Of Vehicle Accessories"INKA SECOND SKIN" Executive collection.Made of Genuine OEM leatherette/vinyl called...
www.inka-corp.com www.inka-corp.com
Click to expand...

ace!! currently have one siting in the basket ready to purchase so good to read a review, thank you.
however, it'll definitely not be leather at that price! ;)
 
Trouts said:
ace!! currently have one siting in the basket ready to purchase so good to read a review, thank you.
however, it'll definitely not be leather at that price! ;)
Click to expand...
Good point actually. It's so realistic to the eye and to touch, it didn't even occur to me it wasn't till you mentioned the price :laugh: However, it has a thick quality feel to it and the pockets are lined nicely inside with some soft synthetic stuff so it won't scratch what you put in there :thumbsup:
 
Fitted Dashboard Seal and Cab Door Seal Upgrade. Easy. The door seal works really well, more of a “thud” instead of a “clunk” when closing them.
www.veedubtransporters.co.uk

VW T5/T5.1 Dashboard Seal

VW T5/T5.1 Dashboard Seal Can be fitted in a matter of minutes, all you need is a sharp pair of snips. Fits all VW T5 & T5.1 Transporter vans from 2003 – 2015. Will need to be cut to length. This product is extremely useful as it stops things like parking tickets, coins and just [...]
www.veedubtransporters.co.uk www.veedubtransporters.co.uk
www.veedubtransporters.co.uk

VW T5/T5.1 Cab Door Seal Upgrade

VW T5/T5.1 Cab Door Seal Upgrade For Both Sides 3M (Ultra High Bond) tape comes pre-attached to make fitting super easy and to ensure a secure, weather-resisting fitment. Significantly reduces road noise in the cab when driving. Manufactured from high-quality rubber for extreme durability. With...
www.veedubtransporters.co.uk www.veedubtransporters.co.uk
 
Update from the past week or so, step by step getting there slowly, tinted the 3rd brake light and fitted pressed plates in a slimline surround, back of the van nearly done now (is it ever done :sneaky:)

Edit to add its not that dark its the same as the rear lights, it's just the angle

20200509_155628.jpg
 
Just made today a solution for hanging either lights or bunting off the wind out awning. (Prob someone will tell me there is something already out there lol) ,
3D printed some 6mm studs to slide up the rail, with a hook on the end.
will trial them out to see how they work.

148038BD-847E-4B82-88B6-EDA3A70F7347.webp

13401174-5209-43FE-8340-21FA04372393.webp
 
CJ_T6-red said:
Just made today a solution for hanging either lights or bunting off the wind out awning. (Prob someone will tell me there is something already out there lol) ,
3D printed some 6mm studs to slide up the rail, with a hook on the end.
will trial them out to see how they work.

View attachment 69209

View attachment 69210
Click to expand...

May have to put them in the ‘For Sale’ section. I’m sure lots of people would want them!
 
VanDamMan said:
Thanks to @J88arv ....just added wallpaper screen to head unit.....having tried a few ...Top Tip ...use a darker back ground so the over lay’d content is easier to read :)

View attachment 69312

sorry ..Radio 2 ...umm I’m old:cool:
Click to expand...

Hi , which model headunit is yours ?

I have the 8180 and I can’t display the DAB information like yours , looks as it should be . Mine puts all the info on the right hand side and a useless space on the left for-station logo . Which it can’t display unless it’s transmitted!
 
You must log in or register to reply here.

Similar threads

Bluephantom
Adaptive Cruise Control VCDS mods
Replies
10
Views
2K
Bav
Bav
antony.charnley
What have I done.. What is next?
Replies
2
Views
2K
z1ts
z1ts
A
T6 Day Van Build – Must-Have Features & “Wish I’d Done That” Advice?
Replies
10
Views
653
Macp
M
A
Minor Mod to Door Pockets – Big Difference in Comfort & Noise
Replies
4
Views
1K
Alex swampy
A
Sladie07
Incoming! Caravelle content
Replies
10
Views
619
Mike Y
Mike Y
Back
Top