What Have You Bought Today?

Many people relying on you matey, well I certainly am, and happy to make a contribution for your efforts (which could come in handy one day). Genuinely proud of you for doing something I've wanted to do, but truthfully a bit scared!
You really shouldn’t let reading scare you so much, even at your age. Start by trying to sound out the letters and you’ll soon recognise the word. Mrs Wayne can help you with the big words!
 
You really shouldn’t let reading scare you so much, even at your age. Start by trying to sound out the letters and you’ll soon recognise the word. Mrs Wayne can help you with the big words!
My wife says that reading is the 'be end and end all'. Not sure I trust her use of the England...
 
Linky please
Offer has expired now sadly. Cheapest is from amazon at £129. I'd hold off a bit as the price of them has been around £90 a few times recently. Keep an eye on the ecoflow website, amazon and ebay.

Might take a while for them to be in stock though
 
Fitted a C rail channeled strip that fits under the roof bar mounting points, neat solution without anything stuck to side of van.
Should make life easier for the drive way awning.
Not my image, but taken from Funky Leisure website that supplied it
This was after reading the excellent thread on here about stainless steel threaded post and EPDM washer mod, £20 and 1 hour later after cleaning up and cutting, filing and siliconing and installing posts, I then take the new c rail out of its shipping box and realise it has to lay flat in the roof channel and be bolted down under the roof bar feet………so all the effort was ripped out and binned and back to new 6mm bolts, felt a complete Wayne Kerr at that point 🤦‍♂️
IMG_2466.webp
 
Last edited:
Got the missing rear heat shield, have the stubby exhaust but noticed a lot of mud getting stuck in and around the rear of the bumper, hopefully this will make the underside a bit more aerodynamic, reduce road noise due to less turbulent air and improve MPG, but this is probably all wishful thinking for a low speed hunk of metal 🤣

PXL_20260412_102025089.webp PXL_20260412_102021934.webp 20250605_150319.webp
 
Back
Top