Thanks I'll have a closer look at my OBD11 then. Maybe it times out and switches off after 20 minutes like other systems.I think the OBD socket draws some power all time but quite how much power is a mystery to me - I only say that because as soon as my Carista is plugged in the small LED starts glowing, even before the ignition is switched on
I leave it plugged in but I'm pretty sure it does have a slight drain. If I need to leave the van for a week or two such as going on holiday only then do I unplug itIs the OBD port powered up when van is off? I usually leave my OBD11 plugged in, never thought about it using battery.
I'm sure it does have a slight drain leaving stuff plugged in to OBD ....either that or my battery isn't quite as good as it used to be![]()
Carista Evo (black) consumes 16 mA when just awake. 23 mA when Bluetooth connection is active.The newer Evo version is supposed to have a low power mode, what it goes to sleep.... But I've not tested it yet.
I'm afraid they never sleep - found in my notes the following, never fell assleep.Thanks I'll have a closer look at my OBD11 then. Maybe it times out and switches off after 20 minutes like other systems.
Many thanks, it's not a lot but worth unplugging I guess.I'm afraid they never sleep - found in my notes the following, never fell assleep.
OBDeleven (1st gen) @12.8V. Average (rms) consumption 32 mA.OBDeleven nextGen @12.8V. Average (rms) consumption 22 mA.

I'm leaving my Evo plugged in, in the hope that the Ablemail will look after the SB.Many thanks, it's not a lot but worth unplugging I guess.
Not sure if it makes a difference if you have a smart alternotor or but I think they are fobbing you off. It needs to know what type of battery you have installed so that it can manage the charging correctly. AGM and EFB batteries require different charging voltages etc. so if you change the battery type the ecu needs to know.@Drive Wayne @drinfinity @Dundee_Kev @Dellmassive (and anybody else who's interested!). I've just had an email from Head of Support @ Carista with the following:
'Thanks for using Carista! The ECU of your car doesn't require the battery technology/capacity to be entered in order to register the new battery, that's the reason why it's not listed as an option.'
@Drive Wayne @drinfinity @Dundee_Kev @Dellmassive (and anybody else who's interested!). I've just had an email from Head of Support @ Carista with the following:
'Thanks for using Carista! The ECU of your car doesn't require the battery technology/capacity to be entered in order to register the new battery, that's the reason why it's not listed as an option.'
So it would seem that VCDS is able to tell the van that there's a new AGM battery in place but Carista can't (because Carista deem it unnecessary). I guess the acid test would be if anybody has actually changed from EFB to AGM and NOT told the van that new a battery type has been used as a replacement (ie. perhaps a Carista user!) and had problems or otherwise as a consequence. From comments above, it would seem that there might be at least one person who made the change with no ill effects so far. Speaking for myself, I suspect it's just too early to tell as it's only been a week and I've only driven the van once since the switch.Not sure if it makes a difference if you have a smart alternotor or but I think they are fobbing you off. It needs to know what type of battery you have installed so that it can manage the charging correctly. AGM and EFB batteries require different charging voltages etc. so if you change the battery type the ecu needs to know.