Removing PU Adhesive

[Vwejit]

I had a conversion company attach my Leighton vans front spoiler and splitter to my van - after a few months it started to come away from the van, and then got to the stage where I just had to remove it completely. It appears to have been stuck on using a PU adhesive of some sort……maybe Sikaflex or similar? My problem is removing all of the old adhesive now before i attempt to reattach myself.
Any advice on what to use to do this?

 

[Dellmassive]

It's a pain in the butt, but can be done.

I managed to get it off by alternating from breakclean to wd40, a plastic scraper, some cloths and elbow grease.



.

Front Sportline Splitter To Woc Splitter - How I Done It -

Front Sportline Splitter to WOC splitter - How I Done It - Front Ends and the overall look and feel of your van is a very personal thing . . . . . And the front splitter is a hot topic. When we looked into getting the van built, stock Sportline body kit was a no brainer . . . . . . just look...

www.t6forum.com

.

 

[Teesix]

There's a product called Sika Remover-208. Costs around 15ish quid per can. That does the trick.

 

[jayc001]

Use a caramel wheel. Any bodyshop or ebay/amazon sells them.