Hi all …Looking to install the Ctek to my t6 , does anyone know where I can find the ignition switch live for the smart alternator? Any photos would be great also ideas of routing the cable from under the drivers seat. Thanks I’m new to this world of converting vw transporters so I’m pretty novice .
New to this forum and the world of vw transporters.
- Thread starter Leekyladd
- Start date
-
- Tags
- ctek ignition live
I did this yesterday, the fuse box inside the cab to the left of the gearstick / selector has a middle row of fuses that are all suitable. I think I used an empty one about three down from the top.
In terms of routing if you take the rubber mat up you'll see other cables that are run in floor channels that you can follow easily enough.
In terms of routing if you take the rubber mat up you'll see other cables that are run in floor channels that you can follow easily enough.
Welcome to the forum by the way!
I was a complete novice when I joined before buying my van last September, but thanks to this forum I've done every single thing to the van myself (ok ok not the poptop!)
I was a complete novice when I joined before buying my van last September, but thanks to this forum I've done every single thing to the van myself (ok ok not the poptop!)
Hi and welcome.
For the IGN live I piggy backed off the row that @middle-englander mentioned above.
There's a photo in this thread below, of the fuse box but make sure to use the middle row
Thread '[T6] Ignition Live wiring at fusebox' [T6] Ignition Live wiring at fusebox
For the IGN live I piggy backed off the row that @middle-englander mentioned above.
There's a photo in this thread below, of the fuse box but make sure to use the middle row
Thread '[T6] Ignition Live wiring at fusebox' [T6] Ignition Live wiring at fusebox
Similar threads
