Front Step Vent with OEM Factory Aux Heating

[Fish]

Image 1 - parts required.
Image 2 - 'Y' outlet on B'pillar
Image 3 - inlet recirculation cut out
Image 4 - underside of b pillar insert

 

[Pauly]

Loving the teamwork here guys

 

[Fish]

Loving the teamwork here guys

This is why the forum is growing day-by-day.. its a fountain of experience and knowledge.

 

[Montecha]

This flippin’ fountain of experience is costing me a fortune.

 

[Fish]

This flippin’ fountain of experience is costing me a fortune.

Imagine life with out the forum..

beaches, more holidays....happy partners..

 

[DaveyB]

So all the necessary parts are being ordered. Thanks particularly to @Deaky @Fish @Pauly for assistance.
Will keep everyone updated on how I get on fitting it all when it arrives and I find a spare few days.

 

[Pauly]

Got everything ready to send to you after weekend

 

[DaveyB]

Got everything ready to send to you after weekend

Awesome, well played.

 

[Andrew]

So all the necessary parts are being ordered. Thanks particularly to @Deaky @Fish @Pauly for assistance.
Will keep everyone updated on how I get on fitting it all when it arrives and I find a spare few days.

Looking forward to the developments.

 

[DaveyB]

Looking forward to the developments.

I’ll keep you posted, and take pictures etc as I go in order to put together a diy guide. Just hope then that Propex Leisure will then be able to affix their heater to it. Will keep a full list of parts used.

 

[Fish]

I’ll keep you posted, and take pictures etc as I go in order to put together a diy guide. Just hope then that Propex Leisure will then be able to affix their heater to it. Will keep a full list of parts used.

I'll do it if they wont.. i've got some chalk and a hacksaw

 

[scotia]

Just typed out a reply and lost it..

Looking fwd to the b-pillar cut, I'm not sure if the y-part has to clip into the part behind or not?

 

[DaveyB]

Just typed out a reply and lost it..

Looking fwd to the b-pillar cut, I'm not sure if the y-part has to clip into the part behind or not?

I believe that the y-piece connects to the flange under the chassis. But we’ll soon find out.

 

[Fish]

I believe that the y-piece connects to the flange under the chassis. But we’ll soon find out.

Yes/no..
The 'Y' branch is bolted onto metalwork of the 'B'pillar and the internal part has the threaded nut..

 

[scotia]

oh ok, i hadnt seen that. will have to order the parts and inspect them!

 

[scotia]

did you guys find the front step part number? The same that Deaky has?

 

[Deaky]

We'll be taking mine out on Wednesday. Hopefully the part number will be marked on it

 

[scotia]

ah ok! great.

 

[Pauly]

I got a step using Deaky’s VIN number and it’s correct will post the part number when I’m at the office next

 

[micksea]

hi,just joined the forum for this thread.will these fittings and steps fit into a 2010 T5.1? where is the best place to order them from?