Esatto Comando plug n play

[cbrblade]

Hi all
Mrs has bought me a plug n play Esatto speaker kit for xmas,i want these wiring to amp so will not be using factory wiring,the tweeters have a crossover attached
do i wire from amp to tweeter then from tweeter to speaker
thanks

 

[Dellmassive]

Post a few pics =)

 

[cbrblade]

I’ll get some in morning

 

[cbrblade]

here you go

 

[Dellmassive]

That's a tweeter with an oem plug on it.

It goes behind the a pillar trim...


so it looks like its an plug and play kit that replaces the stock speakers?

it it just two speakers and two tweeters in the kit?

or did it come with an amp too?

 

[Dellmassive]

more ICE info here:



*****************************************************

AUDIO:

• Audio Upgrade Stage-1 . . . . Blam Relax 200rs Speakers From Skipton.
• Audio Upgrade Stage-2 - Vibe Micro Amplifier Plug & Play - How I Done It -
• Audio Upgrade Stage-3 - Vibe Micro Sub Amp + Jbl Sub - How I Done It -
• Audio Upgrade Stage-4 - Kicker 15" Sub + Kenwood Amps - How I Done It -

*****************************************************

 

[cbrblade]

That's a tweeter with an oem plug on it.

It goes behind the a pillar trim...




so it looks like its an plug and play kit that replaces the stock speakers?

it it just two speakers and two tweeters in the kit?

just speakers and tweeters already had amp fitted when I got van

Last time I did anything like this was about 15 years ago,I went from amp to crossover then from crossover to mid and tweeter

hoping to do same again but wasn’t sure if I needed a separate crossover with the tweeter having one

Just speakers and tweeters
Amp was already fitted when I bought van

last time I did anything like this was about 15 years ago
I went from amp to crossover then from crossover to mid and tweeter
Just wasn’t sure if I need a separate crossover with the tweeter having one already

 

[Dellmassive]

Gotcha.

So if its amped already....

Then just swap the full range door speakers and tweeters.

The tweeters already have the crossover built in so no need to worry.(that's the black box)

 

[cbrblade]

like this