Error - ABS, stability control and Tyre Pressure warning lights on.

Dave276

New Member
So today I have had 3 errors lights appear.

ABS, stability control and Tyre Pressure warning lights on, image attached.

is there any generic software I can use on an iPhone/iPad to check the OBD port for error codes?
I have a wireless OBD module and also ELM Cable for Ford vehicles, I presume the latter is same on VW as I thought OBD was a standard interface.

IMG_5501.jpeg
 
Possibly a wheel speed sensor.....

Carista is a good start point.





.
 
I have the

OBDLINK Mx wifi​


Do you have the OBDlink MX plugged in all the time? Just asking as I had the exact same error lights on my VW. Unplugged the OBDlink MX and the errors went away. A friend gave me the OBDlink MX after selling his car. He had his ABS module replaced on his car as he was getting similar errors (not a VW). He also had it plugged in all the time.
 
Issue resolved after 3 visits to Grouo1 VW service Center Chelmsford.

Visits 2&3 they collected the vehicle.

It was ABS sensors on both wheels.
 
Do you have the OBDlink MX plugged in all the time? Just asking as I had the exact same error lights on my VW. Unplugged the OBDlink MX and the errors went away. A friend gave me the OBDlink MX after selling his car. He had his ABS module replaced on his car as he was getting similar errors (not a VW). He also had it plugged in all the time.

No OBDlink is not plugged in all the time.

Issue resolved by dealer now.
 
Hi @Dave276 , I've got the same 3 lights come on today. Was the replacement covered under all-in- 1?

Our vehicle is a Motability vehicle, so unfortunately I would not know if yours will be covered under all in 1 (I presume this is a VW extended warranty name).

Just make sure they check both as mine had to go in 3 times to get the root cause fixed, which was both abs sensors damaged.

I blame the state of the British roads as root cause.
 
Back
Top