DPF Regen, Yellow Light & Adblue - Whats It All About? -
- Thread starter Dellmassive
- Start date
It has to be a dodgy sensor
Or a leak
Aah, okay then. Something more than a usual delay in registering!
Tried to get some, Euro car parts didn’t have any.
VCDS IDE03142 says 9466.940 km range.
I am going to draw some out
I am going to draw some out
VCDS SAYS 11.81 litres
I am deffo going to try and draw some out.
I am deffo going to try and draw some out.
It would be just waste of time and effort.
Please post engine blockmap data.
How-to create a blockmap file:
Ignition ON
[VCDS]
[Applications]
[Controller Channel Map]
- Single Controller Address = 01
- Login or security access code: Leave blank
- Function: Measuring values
- Output: CSV file
[Go]
The result (CSV) file is saved into directory C:\Ross-Tech\VCDS\Logs
Will do, might take a day or two.
Took this photo of the VCDS on the laptop
It shows 7.992litres and 69mm
I will now attempt to transfer the block map file from my ancient laptop.
It shows 7.992litres and 69mm
I will now attempt to transfer the block map file from my ancient laptop.
I am wondering why VCDS has said over 11 litres to just under 8 litres, still have the spanner and 500 mile countdown? Only driven the van a couple of times 27 miles on the trip.
Without knowing the level, what to do?
Is there a way of clearing the spanner/tank sign and countdown?
Without knowing the level, what to do?
Is there a way of clearing the spanner/tank sign and countdown?
I have looked under the van, I can't see any leaks or a snail trail/tell tale anywhere. The filler push fit is snug.
Mrs is going to get some of the Adblue treatment stuff from Halfords today.
Mrs is going to get some of the Adblue treatment stuff from Halfords today.
And now it’s saying, yes I know the time is wrong, but min 1gal - max 1.75gal is a new message.
Mrs got some Wynns Adblue stuff so I chuckled that in.
Did you draw some out?
So the "Error" has disappeared - a healing on the way?
Any chance to get another engine blockmap now as the error on dash is gone?
Thank you. The level and temperature sensors work just fine. So plenty of AdBlue
Anyways, the ECU software is still as from factory - 04L906056KL 3802
My advise would be to start troubleshooting with updating the software - to version 6166 (or later) just to exclude a known software glitch on MY16-18 engines (as yours is) causing an issue which quite possibly is what you are currently experiencing.
Welcome to VAG-Flashinfo!
VAG Flashfiles Informations - Version check of VAG ECUs - Update check for Audi, Seat, Skoda and Volkswagen
vag-flashinfo.de
Similar threads
