retrofit

So, here goes; having received all of the necessary parts from @Pauly, today I have set about cutting the van paneling in order to install this ductwork so that when I go down to Propex Leisure at the end of March, they can connect their LPG heater to the OEM ductwork, rather than using an ugly...

have seen this covered a few times a while back, got a plastic startline steering wheel want to upgrade to the mfsw highline wheel with controls, anyone done this and know if it’s plug and play and if the wiring for the controls are in the wheel loom ? Cheers

Has anybody installed keyless entry to their T6? I’m not even sure if there is an aftermarket option out there... Can anyone please enlighten me? Cheers

Hi all, I have a Kombi Highline and I'm looking to add power folding mirrors, but my question is if I just buy the mirrors and the switch what is left to do? coding? and I think mine is a model year 18 so would they fold on the fob? Many thanks in advance!

Hi Guys, Currently my T6 has a Composition Colour DAB radio system with the 5" Screen. It's ok but I would like a bigger screen as the quality for the reversing camera isn't great. I'm not interested in Navigation so would just like to fit the Composition Media DAB+ radio system with the 6"...

title says it all really, I’ve just got new kombi with city emergency braking.....so the wee box is there at the front. Can adaptive cruise be added too....I assume it uses same tech.

Got my mits on a centre console, and a few other dash parts over the weekend. Will try and do a small right up as I go along in case others want to follow the same path. Today's job was to figure out what I have and what I still needed to get from Pauly. Hopefully that is sorted now and some...

Does anyone know.... if I get a cruise control retrofit done, can it affect the vans warranty (it still has 13 months to run)? My local dealership was pretty vague, stating that it 'could', but of course they aren't overly helpful and won't fit it themselves!

Hi newbie here I'm collecting my new van on Tuesday he has a solid tailgate so I want to retrofit heated glass and wiper motor kit has anyone carried out this any help gratefully received

hi I have just bought a new T6. Fantastic van! I have the ACC sensor in the bumper because I understand this sensor is also used for the auto brake assist thing. My steering wheel has the cruise control but not the ACC button. Can the ACC be retrofitted. The dealer said I had ACC when I...

Hi, I'm getting my T6 very soon, well in about two hours, I've seen the above kit in the t6 shop. One question I have is in the description it states the wire to make the fog and reverse lights to work on both sides is additional wiring. I assume this is best done before insulation and...

Replaced my standard H4 headlights on my 17 plate kombi highline with genuine H7 headlights from a 17 plate Caravelle. It's literally just plug and play, no warning lights, no VCDS, just swap and go. Does require removing the front bumper but really not as bad as it sounds. IMO the H7's are...

I have just hired a vw Cali to go to F1 as my t6 camper is still in build. It's a 204 fully loaded and it's nice the best thing is the adaptive cruise control I drove for over 100 miles on A1 without touching the pedals. Even when we came to a stop the van stoped and then started again without...

Thanks to @Pauly it made fitting my front parking sensors a breeze, purchased from the reliable T6 shop. Fitted this afternoon 2 .5 hours start to finish. The worst bit i thought was swapping the foglight panels. Paul i took ambient light feed from the heated windscreen switch next to it works...

I have a couple of questions on this: - Does any know.... If T5 caravelle sliding door card panels (the ones with pull up blinds) fit a T6? Has anyone done this? What other options are there for trimming the sliding door

so has anyone managed to retro fit cruise control to a T6 yet? done my t5 years ago which wasnt too hard

Hi I've brought some led rear lights from eBay I've read on here that I'll need to do some extra wiring for both sides to work, is there a link to how to do it and are they just plug n play otherwise?