mfd

  1. General-Monty

    How do I access MFD to change service interval in 19 Trendline.

    Guessing it’s me, but I don’t know how to access mfd data. Been sat in the van ten minutes with no luck. I’d like to change the service schedule to Long Life and change the digital speedo from Kph to Mph. I don’t have steering wheel controls. Done a search but can’t find anything helpful. Can...
  2. H

    AdBlue message remains on MFD

    My range has just dropped from 1600 - 1400 and when i start the ignition the ad blue message automatically shows & stays (till another option is selected ) . It didn’t automatically show when it was reading 1600 . Any reasons why this may be? Cheers
  3. meza

    Can’t set time/clock on MFD - left hand button not working

    I’ve got a problem setting the time on my T5.1 The left hand button on the speedos doesn’t do anything, so I can’t get into clock set mode. The right hand button works - in so far as holding it down clears the trip mileage. Any ideas? I’m 11 hours and 40 minutes early for everything currently.
  4. Stevemcc

    Image in cluster change

    Hi all ,anyone know if it is possible to have this image in dash on t6 and what the coding is if possible thanks
  5. K

    MFD showing MIN0_75G / MAX0_75G message?

    Evening gurus, Whilst trying to figure out how to reset the clock on a 2016 T6 Startline (yes, I figured it out) I managed to get the MFD to flash up with the below image. It said both ‘MAX*_75G’ and ‘MIN*_75G’. I’ve tried to search this on both the forum and Google - with both 0 and O - but...
  6. T

    Digital Display missing MPH

    Hi. Just joined the T6 family and got my first van. It’s just been converted from a commercial vehicle to a camper and I’ve noticed that when I select to see MPH on the digital display above the vehicle. It’s just blank (- - -). Do I have to enable it or is this a fault. Any advice I would...
  7. Crazymind

    Digital cockpit Miles to km T6.1

    Hi folks, heading to Continent tomorrow and can’t find how to change unit and Speedo to km/h on the digital cockpit of my t6.1.
  8. angelameaney

    Fuse for the headlight indicator on the dash

    Hello I have a 2018 T6. The light on the instrument cluster to show the headlight as being on is not lit up. I think it could be a fuse issue and wondered if someone could tell me which fuse it is that I need to check. Other lights come on on the dash like the green cruise control...
  9. I don't

    Open door in MFD shows wrong body type

    So I had to recode for a new battery with obd11 pro and started tweeking. I've managed somehow to change the body shape on the MFD that shows open doors and can't get it back. I've reset the body variant under dashboard but no change. Any ideas would be much appreciated
  10. R

    MFD: “Brakes Failed! Workshop”

    Greetings, apologies if already been posted but a search revealed nothing. I have a 2016 T6 Kombi. I keep getting an intermittent message on MFD, states “Brakes Failed! And then Workshop!” This appears when starting vehicle after being parked over night mostly. It appears for a second and...
  11. T

    Fuel Distance to Empty display

    Hi there, we're new owners of a 2018 T32 LWB Highline. In our old car (Volvo V50 Estate) we had a 'distance to empty' display as part of the on-board computer, which was really useful. The alert comes up when the fuel gauge reaches 'empty' and tells us how many miles we have left, but on our...
  12. Norberto Trevino

    Basic Instrument cluster mods

    Hi guys. I've checked previous posts and it seems this query has not been address before. My 2018 T6 is the most basic LWB 9 passenger van made in Germany and exported by VW to Mexico. It has the basic dashboard, the one with Tach one the left, speedometer to the right and the window in the...
  13. M

    No way to access MFD modes?

    Hey all, I just bought a used T6, but I only just noticed there are no switches on the end of the wiper stalk to flip through the display options (range, avg consumption etc). The steering wheel doesn’t have buttons either. Could it be that either one or both of these were replaced? It seems...
  14. C

    Outside temperature shows incorrect

    My outside temperature gauge goes up and down It’s about 18c outside and the reading goes from +3 to +18 and everything in between Any ideas ?
  15. Crazymind

    MFD: What is the ‘Refuel’ status for?

    Hi folks, Kind of trying to figure out what this info is supposed to be.(2016 T6) I have never seen this in any car. And one (stupid?) question: Is there a way to see the trip average mpg consumption? Through the info I can only see Long term average MPG.
  16. betty67

    Winter tyre setting on MFD?

    Just looking at computer on dash and I have a setting for winter tyres which was set to on Never had winter tyres just changing setting wondered haw it affects van as cannot feel any change?
  17. B

    Low Wash Warning Light

    Hi, ran out of windscreen washer fluid on the motorway yesterday yet no warning lights appeared? That made me realise that I'd been driving two and a half hours and no "rest warning' light had appeared. Could this be a fuse? I've searched for the fuse box diagram (2021 T6.1) but seriously, how...
  18. didigolftd

    Dash basic MFD language

    Hi all, My van is imported from Germany. My dash insert is the poorest one, with very few info displayed. Unfortunately, this little information is in German sand I would like to change it with Vcds. I’ve tried 17 than 10 but can’t find any language section. Does someone know how I can change...
  19. M

    Instrument cluster update?

    Hi, I've got the latest 3D instrument cluster on my T5.1. it all works great, but I've noticed that the graphic of the van does not show when the tailgate is open? the light etc still comes on in the van and thus I know its not anything wrong with the switch or mechanics. Is there anyway to...
  20. Robert

    DAKU'S VAG CONTROLLER for PQ25

    ADDITIONAL BLUETOOTH ICON Quick demo video. This is demonstration of just one (of many) amazing functions which come with @Daku's controller connected to Instrument Cluster CAN-BUS. Basically when a mobile phone is connected to the vehicle OEM hands free kit the BLUETOOTH ICON is being...
Back
Top