Wheel arch liner fitting/removal

[Deaky]

Remove the wheel first. There's a few Torx screws around the outside edge, a couple either side of the suspension strut and one/two under the bumper. Theres a plastic clip at the front, prize the middle out and that should release the clip. The liner will come out easily then.

 

[paulfr]

Hi Paul ... Did you fit a new wheel arch liner? I need to remove the drivers side one to get at the horn. Was the process straight forward?
MTIA

Pretty much as deaky said,take the wheel off first,then look for all the fixings and take them out.....pretty straight forward.

 

[T6LadyDriver]

Remove the wheel first. There's a few Torx screws around the outside edge, a couple either side of the suspension strut and one/two under the bumper. Theres a plastic clip at the front, prize the middle out and that should release the clip. The liner will come out easily then.

Thanks very Deaky ... Just need a dry day and plenty of hot drinks.

... then my earache will stop from her who must be obayed!