What Have You Done To Your Van Today?
- Thread starter Daneeyre
- Start date
-
- Tags
- mod modification mods retrofit
Is this the one you sold or did you end up holdong on to it? Some serious work done with it lately.
Held onto it. Was having a bad weekend with it and had a man grump
more bits ticked off
Fitted the rear spoiler. Fits in places, other areas are a bit gappy but overall it’s fine
Added a second set of interior lights in the roof lining so it matches side to side, just need to plug pins to turn up from Amazon and they can be connected.
Trimmed the A pillars in carpet to match the rest of the van as they were looking tired and grubby.
Finally got a steering wheel that fits from a 2018 polo.
Fitted the rear spoiler. Fits in places, other areas are a bit gappy but overall it’s fine
Added a second set of interior lights in the roof lining so it matches side to side, just need to plug pins to turn up from Amazon and they can be connected.
Trimmed the A pillars in carpet to match the rest of the van as they were looking tired and grubby.
Finally got a steering wheel that fits from a 2018 polo.
Last edited:
Did my bit
P.S no virtue signaling intended.
P.S no virtue signaling intended.
Last edited:
Nice! Did you bond with adhesive and also bolt it down? Or just adhesive? Not too heavy for your pop top, I’m guessing.
Did the Dodo Acoustic Liner on the driver door finally. Zero rattles now after Dodo Mat previously.
Tip 1. Don’t forget to reconnect door release cable when refitting or you’ll break at least two of your brand new door card clips.
Tip 2. Don’t pinch your finger popping the door pull handle trim back on in temper after removing and refitting the door card with the cable connected!
Tip 1. Don’t forget to reconnect door release cable when refitting or you’ll break at least two of your brand new door card clips.
Tip 2. Don’t pinch your finger popping the door pull handle trim back on in temper after removing and refitting the door card with the cable connected!
Last edited:
Just bonded with adhesive - hope it holds
Me too!
I spent a lot of time planning to fit a larger rigid panel (twice as big and 17kg). I decided it would have to be bolted and bonded… and ultimately returned to buying a flexible panel.
I wanted closer to 300w.
Any dashcam footage?
Bound to be read up with everything now?
Last edited:
Its on camera but not worth the hassle .
Did they do it on a dyno or was it remote at home? I've been weighing this up to get more get up and go from my 102bhp.
It was at ‘at home’ jobby. I totally get different strokes for different folks, and gearbox and etc etc.
all I wanted to achieve was sitting a motorway speeds to be less of a struggle and so far it’s certainly achieved that.
