This is the screen I do not have even after rechecking all the coding and adaptions ?Not sure what you mean - tyre size selection? For passive TPMS there is no selections - just the below (SET).
View attachment 190972
This is the screen I do not have even after rechecking all the coding and adaptions ?Not sure what you mean - tyre size selection? For passive TPMS there is no selections - just the below (SET).
View attachment 190972
Ok will do later today see how work goesJust to double(triple)check please post
A) VCDS Auto-Scan and adaptation map from 5F - before any changes were made
B) Current VCDS Auto-Scan and adaptation map fro
Just activated indirect TPMS this morning using the settings detailed in this post and it works. Thanks PaulyTo activate TPMS we are going to start with module 03 ABS
Enter module 3 and then go into coding/long coding helper
In here we need to change the five values below, its important that all five are changed at the same time, changing them one at a time does not work and will generate an error
Byte 0 Bit 5 - 0
Byte 6 Bit 3 - 0
Byte 8 Bit 2 - 0
Byte 14 Bit 4 - 0
Byte 17 Bit 4 - 1
save the changes and exit
dont worry if faults appear they will sort them selves out when the rest of the programming is done
--------------------------------------------------------------
Now we are going to move on to module 17 instruments
Enter module 17 and then go into coding/long coding helper
Find Byte 4 Bit 0 and turn on (put a tick in the box)
save the changes and exit
--------------------------------------------------------------
Lastly is module 5F infotainment
Enter module 5F and then go into adaptions
All should show 'not active' so need to be changed to the below values (its quite a long list so use the search box to shortcut to 'rdk' and '0x07' channels)
ENG122227-ENG117541-Car_Function_Adaptions_Gen2-menu_display_rdk = activated
ENG122227-ENG117543-Car_Function_Adaptions_Gen2-menu_display_rdk_over_threshold_high = activated
ENG122229-ENG117704-Car_Function_List_BAP_Gen2-tire_pressure_system_0x07 = activated
ENG122229-ENG117705-Car_Function_List_BAP_Gen2-tire_pressure_system_0x07_msg_bus = Extended data bus
Thats it, everything can be saved and exited, after all changes are made reset any fault codes that are showing
HiIs anybody or place in London or nearby able to help me with this? I failed a mot today as can't get rid of tyre pressure warning light. Local vw garage don't wanna help. Happy to pay for your service. Matthew.baker@me.com
Ok but why do I not have the extra slot in the vehical menus for the TPMS
Hi, did you resolve the tire warning light not going off. I have the same problem on my 2021 T6.1.Hi
Now have same issue. 6.1 Kombi with tyre warning light after fitting 20s with std valves
Did you find someone in London/Essex area that can help?
Thanks
Hi Mate, can you help me with the chances I need to make in the ABS for the coding for TPMS on T6.1.To activate TPMS we are going to start with module 03 ABS
Enter module 3 and then go into coding/long coding helper
In here we need to change the five values below, its important that all five are changed at the same time, changing them one at a time does not work and will generate an error
Byte 0 Bit 5 - 0
Byte 6 Bit 3 - 0
Byte 8 Bit 2 - 0
Byte 14 Bit 4 - 0
Byte 17 Bit 4 - 1
save the changes and exit
dont worry if faults appear they will sort them selves out when the rest of the programming is done
--------------------------------------------------------------
Now we are going to move on to module 17 instruments
Enter module 17 and then go into coding/long coding helper
Find Byte 4 Bit 0 and turn on (put a tick in the box)
save the changes and exit
--------------------------------------------------------------
Lastly is module 5F infotainment
Enter module 5F and then go into adaptions
All should show 'not active' so need to be changed to the below values (its quite a long list so use the search box to shortcut to 'rdk' and '0x07' channels)
ENG122227-ENG117541-Car_Function_Adaptions_Gen2-menu_display_rdk = activated
ENG122227-ENG117543-Car_Function_Adaptions_Gen2-menu_display_rdk_over_threshold_high = activated
ENG122229-ENG117704-Car_Function_List_BAP_Gen2-tire_pressure_system_0x07 = activated
ENG122229-ENG117705-Car_Function_List_BAP_Gen2-tire_pressure_system_0x07_msg_bus = Extended data bus
Thats it, everything can be saved and exited, after all changes are made reset any fault codes that are showing
I'm not using VCDS, van is too new and VCDS doesn't support it yet. Using Autel to do it so the tick box option isn't available on thereJust follow the steps in post 1, coding changes are just tick boxes
More likely your VCDS dongle is too oldI'm not using VCDS, van is too new and VCDS doesn't support it yet. Using Autel to do it so the tick box option isn't available on there