How to activate Active Lane Guidance in a T6.1

[solutionz]

I have Lane Assist in my T6.1 and I expected it to be like a semi auto pilot by keeping the car in the middle of the lane. Instead it just ping pongs between the lines of the lane. However it seems like it is possible to enable Adaptive Lane Guidance which will keep the car in the centre of a lane.

Sniffing around VCDS hasn't revealed anything noticeable. I can only assume that it needs a few other adaptions to make it come to life. Can anyone shed any light onto how to enable this feature?

Post your VCDS autoscan.

I enabled Lane Assist (HCA) and Adaptive Lane Guidance on my MY21 T6.1 with VCDS. I don't have the exact steps in front of me but the relevant codings will be included below (TSR & pACC is not fully coded):

> Address 13: Auto Dist. Reg (J428) Labels:| 2Q0-907-572.clb
> Part No SW: 2Q0 907 572 R HW: 2Q0 907 572 B
> Component: ACCCONTIMQB H03 0372
> Coding: 3204670B49FF8748949C815580508700000000000000000004
> Shop #: WSC 00012 790 00202
> ASAM Dataset: EV_ACCMRRCONTIVW376 003016
> ROD: EV_ACCMRRCONTIVW376_003_VN54.rod
> VCID: 43D8260FCB138273D21-8016

> Address 17: Instruments (J285) Labels:* Redir Fail!-SRI3
> Part No SW: 7LA 920 320 A HW: 7LA 920 320 A
> Component: KOMBI 502 5175
> Coding: 24A40008658800080188620B1001000080001F02
> Shop #: WSC 00012 790 00049
> ASAM Dataset: EV_DashBoardVDDMQBA0 001044
> ROD: EV_DashBoardVDDMQBA0_VW27.rod
> VCID: 353C48D795C72CC36C5-8060

> Multifunction steering wheel control module:
> Subsystem 2 - Part No SW: 3G0 959 442 N HW: 3G0 959 442 N
> Component: E221__MFL-PR6 H07 0110
> Serial number: PR6-0440036007212854
> Coding: 2C0D00

> Address 44: Steering Assist (J500) Labels:| 2N0-909-143.clb
> Part No SW: 7LA 909 144 F HW: 7LA 909 144 D
> Component: EPS_MQB_ZFLS 751 7150
> Coding: 1306
> Shop #: WSC 00012 790 00202
> ASAM Dataset: EV_SteerAssisMNB 002012
> ROD: EV_SteerAssisMNB.rod
> VCID: 45DC3817C527BC43FC5-8010

> Address 5F: Information Electr. (J794) Labels:* None
> Part No SW: 3G5 035 876 C HW: 3G5 035 876 A
> Component: MU-O-N-R2 H56 0782
> Serial number: WG8LGM151220000
> Coding: 64600008000020000000000000000000000000000000000000
> ASAM Dataset: EV_MUOIMQB 001002
> ROD: EV_MUOIMQB_VN46.rod
> VCID: 2F307ABF779B1613269-807A

> Address A5: Frt Sens. Drv. Assist (R242) Labels:* None
> Part No SW: 2Q0 980 653 B HW: 2Q0 980 653
> Component: MQB MFK 3.0 H13 1202
> Serial number: E57829512203390
> Coding: 00010C08117AC020909F00000030002006018000000000000000000000000000
> ASAM Dataset: EV_MFK3ValeoMQB 007042
> ROD: EV_MFK3ValeoMQB_007_VW27.rod
> VCID: 343A75D39EBD35CB5BB-8060

 

[Chrjan]

I have a recently delivered new T6.1 with traffic sign recognition and high beam assist which should mean that activating active lane assist ('adaptive lane guidance'?) is possible - right? I have the Carista dongle (which I've not yet used) - is there a really easy to understand step-by-step guide I could follow to make this work? Anyone out there with the time/patience to help me/talk me through it? These paragraphs of code are a little overwhelming for me and I'd be worried that I'd mess something up irreversably!
Thanks in advance

 

[thehuntercrew]

I have a recently delivered new T6.1 with traffic sign recognition and high beam assist which should mean that activating active lane assist ('adaptive lane guidance'?) is possible - right? I have the Carista dongle (which I've not yet used) - is there a really easy to understand step-by-step guide I could follow to make this work? Anyone out there with the time/patience to help me/talk me through it? These paragraphs of code are a little overwhelming for me and I'd be worried that I'd mess something up irreversably!
Thanks in advance

Please tell me you got this working - I am holding off buying the dongle as I have been unable to identify what steps are needed, and active lane assist is not listed as one of the "features" of the Carista. I have traffic sign recognition and headlight beam assist on a 2022 T6.1, so I think I am ready to go.... thank you so much.

 

[Dorin]

Did anyone activate lane assist with obdeleven on a t6.1? Managed to activate high bean assisst.