cbe pc210

Hi I have a problem with a cbe pc 210 control panel. It no longer turns on on the head unit. But all the fuses seem fine and there is other 12v that runs through it but can't get the head unit to switch on so therfore no power to pump or lighting. Any help will be appreciated

Hi, brand new to this forum and also a brand new owner of a 2020 T6, converted by Leighton Vans. I bought this van for work purposes, a couple of weeks ago I lived out of my van for 7 days straight with no issues at all, I did not plug into mains as I have a solar panel and that seemed to be all...

CBE PC210 Kit (less consumer unit) I purchased this kit from Kiravans back in March but, with the exception of the consumer unit which I have put in the van, I have not used/installed any of it. The pack is made up of the following: CBE DS300-UK - Fused Distribution Box CBE PC210-ST -...

I have a wire hanging inside my right rear bumper, has a plastic crimp on the end and was out of one hole into another. I can thread it back into the space but just wondering what's its for. The van has just come back from conversion so not sure if it's linked to that.

Recently got my van back from conversion, I've only got a 13 litre fresh water tank with an electric pump. In order to use the tap, I was instructed to turn on the pump via the CBE PC210 panel, then use the tap, then turn off the pump via the panel. Is this normal? I've stayed in caravans with...

Hi all, I have a CBE PC210 12V & 230V kit. 12v is kind of straight forward and I have it mainly all wired up but have a question regards the 230v RCD wiring. I shown a qualified electrician who actually owns a boat but not come across this type and he said its quite bit different to what he...

Hi I have a CBE leisure system in my T6. Today i was installing a new 12 v socket and when going to connect the negative wire to the lug at the bottom of the DS300 distribution box and existing negative coupling of 3 cables slipped and touched the positive wire next to it. Now my PC210 panel...

Hi, I have recently installed a CBE PC210 kit in my campervan, however the system won't turn on (when I press the on button it triggers a relay and makes a sort of buzzing noise) I originally had this problem when I first installed the system but I fixed it by wigging the 16 core controller...

Hi Guys, Looking for a little help. I'm looking to install a CBE PC210 power Management kit in my T6. Here is the kit below: CBE PC210 Complete Kit, CBE electircal, Caravan & Motorhome Electrical, CBE, Electrical Accessories - Grasshopper Leisure I have a few concerns in relation to the...

I am looking to use the CBE PC210 Controller in my campervan conversion, but with a Victron Blue Smart Charger instead of the CB510 charger that comes with the PC210 Controller kit. However there is a control line between the PC210 controller and the CB510 charger called '12v net signal' (or...

Hi all fitted CBE 210 kit to my conversion on this system you need a ignition live to turn the system off when the ignition is on, so i linked this to a cable under my passenger seat, light blue with yellow band which gives 12v when ignition is on but its making the relay on the 12v cbe box...