T28 with 97Y tyres…

[Brimble]

Hello, I'm after some advice on tyres please. I have a T28 converted T6 that currently has 255/35 R20 97Y with Wolf Race alloys and I've been told today that they are not the right tyre for the load weight and that I need a 103Y. I have been searching the net and had no luck finding the right tyre. Cheers

 

[JOG]

You might struggle for load rates on 35 walls

Pirelli P-Zero PZ4 tyres, Buy Online, FREE Fitting | National

Buy Pirelli P-Zero PZ4 tyres online today at National and get Free fitting at your local National fitting centres across the UK. Guaranteed price promise!

www.national.co.uk

 

[DaveD]

Hello, I'm after some advice on tyres please. I have a T28 converted T6 that currently has 255/35 R20 97Y with Wolf Race alloys and I've been told today that they are not the right tyre for the load weight and that I need a 103Y. I have been searching the net and had no luck finding the right tyre. Cheers

A T28 needs tyres load rated at 100 or more, not a minimum 103 although 103 would of course be OK.

 

[Ads_Essex]

Haida do tyres suitable (or at least did) in that size.

 

[Deaky]

Depending on your engine variant, 99Y may be ok, otherwise 100Y is a minimum. Check your weight plate. If it’s 1550/1550 then 99Y if it’s 1600/1550 then 100Y

 

[Brimble]

Thanks for the comments all. I'll check the weight plate and see what that throws up!

 

[DaveD]

This is excellent reference material;

General Information - Wheels & Tyres

Wheel & Tyre Info - T6 Range These posts are intended for basic information covering the T6 fleet that should hopefully answer lots of initial questions about sizing and fitment If you have any info or think anything should be added that could benefit then please post it below and i will edit...

www.t6forum.com

 

[Brimble]

This is excellent reference material;

General Information - Wheels & Tyres

Wheel & Tyre Info - T6 Range These posts are intended for basic information covering the T6 fleet that should hopefully answer lots of initial questions about sizing and fitment If you have any info or think anything should be added that could benefit then please post it below and i will edit...

www.t6forum.com

Thank you that's really useful