Stereo Wiring.

[Jontejoo]

Hello.

Thanks first of all for a wonderful forum.


I bougth a xtron head unit "china"
I know cheap crap. But it is for my work car.

Now to my question. Where do i find +12 that is going over the ignition?

In the quadlock its only constant power ? Have searched the forum with no luck.


My car is a transporter t6 2016.
And sorry for my english im from Sweden.



Grettings Jonte

 

[Jontejoo]

This is the wiring on the head unit.

Do i need illumination? Or do i Only need gnd, +12 constant and +12 over ignition?


And then ofcourse speaker.

Screenshot_20191117-122620_Samsung Internet

• Jontejoo
• 17 Nov 2019

 

[mmi]

Where do i find +12 that is going over the ignition?

Have a look ---> 12v Igntn Feed + 5xusb Charging From Ign Feed - Today's Install

 

[Dellmassive]

You can take a +12v ignition from the lower dash fuse box.

It you can get a CAN bus adapter that will give you the feeds for the stereo you need..... like these...

.

 

[Jontejoo]

You can take a +12v ignition from the lower dash fuse box.

It you can get a CAN bus adapter that will give you the feeds for the stereo you need..... like these...

.
View attachment 54755

Ah thanks for the tip .
Do i need to use a empty or can i connect to one use ?


Do i realy need canbus adapter?
This head unit does not need that i think.

Check this link
Xtrons Android bilspecifik bil stereo för VW (Golf / Passat / Polo / Touran), Skoda (Fabia / Octavia / Yeti) och Seat (Leon / Altea / Toledo)

The seller told me that it was bolt on .

But in my oem harness i have 2 cabels for canbus, but how do i know witch is + - ?



Thanks again !

 

[Deaky]

Ah thanks for the tip .
Do i need to use a empty or can i connect to one use ?


Do i realy need canbus adapter?
This head unit does not need that i think.

Check this link
Xtrons Android bilspecifik bil stereo för VW (Golf / Passat / Polo / Touran), Skoda (Fabia / Octavia / Yeti) och Seat (Leon / Altea / Toledo)

The seller told me that it was bolt on .

But in my oem harness i have 2 cabels for canbus, but how do i know witch is + - ?



Thanks again !

Canbus high is orange/green. Can us low orange/brown

 

[andys]

Something like this is what you need, it gives you two fused outputs from one fuse socket
Add A Circuit Piggy Back Fuse Tap Mini Blade Fuse Holder ATM 12V | eBay

 

[Jontejoo]

Canbus high is orange/green. Can us low orange/brown

Okey i understand the wiring almost.
But where do i connect the illumination cabel from stereo ?



All thanks to you ho replies.

 

[Dellmassive]

Illumination feed can be got from CAN bus connection.

Or CAN bus decoder box.

Or blue/grey illumination feed wire at back on light switch or any other button. (Its a dimming PWM LED feed)