Seat layout in a LWB not RnR or RIB

[D34NNO]

Evening all, I've just bought myself a T6 LWB and as the title I'm looking to put seating in my van and not using an RnR or RIB system as we'll all be seated up front as there is only 3 of us.
I've attached an image of what layout of seating and units i'd like but nowhere does this style (not that I've found anyway)
This was taken from the T4 forum and was custom made by himself. I thought od the U shape system but would like a tall unit mainly to mount electrics etc.
I am contemplating the EVO Design 2.4 twin tambour setup and have an L shaped seating area.

Any help or advice is welcomed.

Thanks

 

[airhoguk]

Could consider van furnitures u shape kit with a evomotion kitchen unit or similar

 

[D34NNO]

Could consider van furnitures u shape kit with a evomotion kitchen unit or similar

The thought had crossed my mind if I could get a SWB unit set then basically cut the vertical unit in half. But obviously do a good job incase it doesn't work out and a bit of trim and rear bracing could be added to hid the cut. But yes good suggestion. The only thing I can't seem to find is information as to how and where they put their electric setup.

 

[airhoguk]

Looking at some Facebook links the electrics have been put in either the kitchen unit or the nearside front face of the bed

 

[Scoobied64]

Evening all, I've just bought myself a T6 LWB and as the title I'm looking to put seating in my van and not using an RnR or RIB system as we'll all be seated up front as there is only 3 of us.
I've attached an image of what layout of seating and units i'd like but nowhere does this style (not that I've found anyway)
This was taken from the T4 forum and was custom made by himself. I thought od the U shape system but would like a tall unit mainly to mount electrics etc.
I am contemplating the EVO Design 2.4 twin tambour setup and have an L shaped seating area.

Any help or advice is welcomed.

Thanks

View attachment 117819

Hi there,

we have an L shape layout in the back of our t6 as we don't need belted seats in the back - I'll try and upload some pictures later - however if you want pre done units that you can fit yourself have a look at

Retro plywood | sawmillcampers

L section seating for VW T5s and T6s

www.sawmillcampers.com

I visited them and their set up is very professional

 

[Scoobied64]

Hi there,

we have an L shape layout in the back of our t6 as we don't need belted seats in the back - I'll try and upload some pictures later - however if you want pre done units that you can fit yourself have a look at

Retro plywood | sawmillcampers

L section seating for VW T5s and T6s

www.sawmillcampers.com

I visited them and their set up is very professional

Pics below give a idea of the layout - this layout of our van under construction not the sawmill version

 

[Kramsdog]

seen this and it’s looks huge compared to my swb

 

[D34NNO]

Cheers, they look great

 

[t0mb0]

I don’t understand where all the kit goes in a U shape design. Once you’ve filled up the under-seat boxes, where does everything go?

 

[D34NNO]

I may be wrong but id say there is probably more room in a u shape system?