Thanks. I was planning on using the OEM bolts.The new bolts are 17mm heads so Caddy ones or the like will fit. I think the OE ones were 19 mm head
Rotiform STL
- Thread starter cossie
- Start date
The original van bolts won't work, they're radius seat. The Rotiforms are tapered seat.
My STL came with a set of the correct bolts in silver, in the box.
Thanks. Might have a rethink then.
Hi All.
I'm thinking of running a group buy offer on Rotiform STL in 20" Silver. This would be for 4x 8.5x20, ET35 in Silver, with fitting kit and delivery at £950 per set including VAT. I would need to secure a minimum of 3 confirmed orders to be able to hit that price, so I thought I would just post this here and see if it gets any interest.
Cheers,
Chris.
I'm thinking of running a group buy offer on Rotiform STL in 20" Silver. This would be for 4x 8.5x20, ET35 in Silver, with fitting kit and delivery at £950 per set including VAT. I would need to secure a minimum of 3 confirmed orders to be able to hit that price, so I thought I would just post this here and see if it gets any interest.
Cheers,
Chris.
Hi Chris, I'm interested, what else would be needed, spigot rings / bolts etc?
I’ve got a set of silver 20” STLs on the shelf I can do a very good deal at. If anyone is ready now.
Can one of you guys with these wheel fitted provide a side view of the front wheel showing how close to the lip the wheel finishes, or how much it pokes out or tucks in?
I’m lowered about 40mm with 17 inch devonports looking to upgrade to these in 18 inch, wish they did a 19 inch, that’s would be the sweet spot between comfort and look.
I’m lowered about 40mm with 17 inch devonports looking to upgrade to these in 18 inch, wish they did a 19 inch, that’s would be the sweet spot between comfort and look.
The whole wheel figment thing has evaded me since the dawn of time.
I currently have 17” Devonports with 20mm spacer hub on the rear and 15mm spacer hub on the fronts, I do not want any wheel pretending out from the wheel arch at all.
Will these fit?
I currently have 17” Devonports with 20mm spacer hub on the rear and 15mm spacer hub on the fronts, I do not want any wheel pretending out from the wheel arch at all.
Will these fit?
Alloy Wheel & Tyre Fitment Calculator. Offset, Tyre Stretch and Speedo Error | Will They Fit
Alloy Wheel & tyre fitment calculator - it calculates inset, poke, speedo error, tyre stretch and loads more.
www.willtheyfit.com
No. You have spacers on your Devonports.
However the 18s will poke out of the arch, however the 20s won't.
I think to be fair to Rotiform and this wheel in particular we need to be clear that THQ are talking about the 20” wheel only…. they’ve obviously been working with Rotiform to produce an 8.5” wide wheel with a bigger offset of ET35 for super low vans on So Lows or on Air for example. Now that Andy @Solow Suspension (THQ) is gracing us with his presence(welcome Andy) he might be able to confirm what I am assuming?
So to be clear…. I’ve been running the Rotiform STL 18” on my van since October ‘22 with absolutely no issues whatsoever. All these things are very subjective and what I like might not be to your liking, but I like how the 9” wide wheel ET30 sits on the front of my van. The tyres I’m running are 235/50 and my van is lowered by 80mm. I prefer the wheels to ‘poke out’ rather than ‘tuck in’, but as I say, this is just my preference.
I’ll put a couple of pictures below for reference.
View attachment 219168View attachment 219169View attachment 219170
Yes that’s correct.
20s are a narrower wheel and bigger offset.
