Ramps for wide tyres

Stooble

Member
Can anyone recommend a pair of ramps to suit 275mm tyres.
I don't want the low rise versions & I've seen a set of plastic 3T high rise (200mm tall) ones on flea bay for £70.
Open to suggestions though.. thanks
 
I've got some of these . . .

RhinoGear 11912 RhinoRamps MAX Vehicle Ramps (Pair, 16,000lb. GVW Capacity) by RhinoGear

... RhinoGear 11912 RhinoRamps MAX Vehicle Ramps (Pair, 16,000lb. GVW Capacity) by RhinoGear: Amazon.co.uk: Car & Motorbike

... RHINO RAMPS HEAVY DUTY 5 TON GVW LOW CLEARANCE VEHICLE CAR VAN RAMPS (PAIR)

... Best Car Ramps (Review & Buying Guide) 2020


1587293750133.png


....




you can see them here:





Here we go the wait is over - all the answers here. . . . . . . @Pauly

This time is a video =]



....
 
Make some to fit! 25mm ply and 2x2 softwood. No creaks or groans. Had my T30 up on them for a week with no issues.

View attachment 66475

Need to finish them with a bump stop still actually. Job for today me thinks!
those are great . . . nice and high too.

but defo need a bump stop in V2, and may i say a slightly longer top section? =]
 
those are great . . . nice and high too.

but defo need a bump stop in V2, and may i say a slightly longer top section? =]
I can add the bump stops quite easily, I had planned to put them on originally and have built a little ledge to rest them on; impatience got the better of me and I got carried away with the diesel heater install! Very good shout on the longer top section though!
 
Back
Top