Obdeleven to code in new LED lights?

[Lux]

Hi all,

I just wanted to confirm before I purchase if the obdeleven in the link below will be able to code my lights for led and get rid of the warning light on the dash and keep the canbus happy.

OBDeleven V2 PRO Pack + 100 Credits | Next Generation - VAG/BMW Diagnostic Tool

OBDeleven PRO Pack – Unlock Hidden Features in Your VW, Audi, Skoda or SEAT *IMPORTANT: Please check which function you plan to use the obdeleven on and which country you are located in as there are advanced restrictions for BMW vehicles outside of EEA, US and UK countries.* Basic features only...

www.vaggarage.com.au

Many thanks,

Matt

 

[mmi]

Well, definitely maybe. The dongle itself can alter all the codings/adaptations allowed by controllers. However, some features still are in development for iOS.
Thus, at the end it's the know-how what actually needs to be altered - most likely there won't be a one-click function for this - just need to know what to do.
Which van yours is T6 or T6.1 - they are totally different animals re electronics?

 

[Lux]

Well, definitely maybe. The dongle itself can alter all the codings/adaptations allowed by controllers. However, some features still are in development for iOS.
Thus, at the end it's the know-how what actually needs to be altered - most likely there won't be a one-click function for this - just need to know what to do.
Which van yours is T6 or T6.1 - they are totally different animals re electronics?

its a t6
I've changed my headlights, drl and rear lights (bulbs) to LED wanting to code it out so i dont have the error on the dash. Can't seem to clear the codes with carista

 

[mmi]

its a t6
I've changed my headlights, drl and rear lights (bulbs) to LED wanting to code it out so i dont have the error on the dash. Can't seem to clear the codes with carista

Yes, OBD11 can disable T6 lamp diagnostics - each of them separately.

 

[tomosllyr]

Yes, OBD11 can disable T6 lamp diagnostics - each of them separately.

View attachment 199100

I've just had a look and my diagnostics are all switched off already (apart from "backup light") but I've still got a bulb warning light on. Is there another way of deactivating it on obd11?

 

[Lux]

I never ended up getting the obd11 so I can't help unfortunately, got the fella to turn of the dash light when I got a tune. However I still have active fault codes on the bulbs when I scan. Just got vcds so will look into it next time I have some time.

 

[Shane_Long]

I've just had a look and my diagnostics are all switched off already (apart from "backup light") but I've still got a bulb warning light on. Is there another way of deactivating it on obd11?

Did you get to the bottom of this? I have the same issue

 

[tomosllyr]

Did you get to the bottom of this? I have the same issue

I did, but not with obd11. I got a better canbus error free bulb. Happy to try to find a link to them if you need one.

 

[Shane_Long]

I did, but not with obd11. I got a better canbus error free bulb. Happy to try to find a link to them if you need one.

I’ve actually just managed to do it with obd11. I turned low beam light diagnostics to active and it’s now off

 

[Gavinda]

If it helps anyone, drl monitoring is part and parcel of the taillights.