Droopy ceiling trim…

Bridger8

Member
T6 Pro
Hi all

Since getting the inside lined the roof trim is constantly falling down so think I need to replace the clips holding it up… but I’m confused ref the right ones. Help please?

My droop…
AD7B454C-B45F-4816-9BFF-0B0ED00825F8.jpeg
F40532F6-5B0E-4895-8C18-08A588614ABE.jpeg

After some forum searching saw a ref to these, but they look different to the ones in already… which could be the issue!!

Thanks
3F2CB273-E04E-4103-A7DD-FC8FB1100346.png
 
If you're after a quick "hack" you could try wrapping the existing clips with cotton wool to tighten them up.
 
We would recommend these clips. For your front strip we use 6 and for your rear strip 8.

You will need to remove the plastic receiver mounted in the strut from factory and these will line up with all the holes. Very strong and will not sag at all, although you can also remove them if necessary and they can be reused


4B9F04C6-BB6B-4677-A476-0E61A1A91D4F.png
 
Back
Top