Connector reference

Loz

Senior Member
Admin
Moderator
VIP Member
Please post your connector pictures with part number and its use so that we can compile a useful reference. Then a moderator can edit this post and add it to the table.

Part NumberTypeRolePicture
4F0 973 7022 pin female plug with locking tabConnector for fuel temperature sensor1605530257128.png1605530325165.png
8K0 973 702D2 pin female socketSplit charge relay connector1605530019864.png1605530177065.png1605692718554.png
1J0 973 7336pin female plugled rear tail light conversion1605692031616.png1605692072334.png
1J0 973 73714 pin female plugLED headlamp plug
7M3 972 726plug for headlight range control module
4B0 973 712Aplug for level sensor
 
Last edited:
Could anyone point me in the right direction for a replacement 12v? I can't seem to find one that fits this adapter socket. Any help would be appriated

IMG_20201121_144554.jpg
 
@Loz Great idea!

Your plug terminal 1J0 973 733 has a male counterpart 6 pin plug black which is 1J0 973 833.
The female terminals / male repair wires are: It is much cheaper to buy the terminals than the repair wires unless you are crap at crimping them to wires.

0.5mm 000 979 021 E Male counterpart 000 979 022 E (E signifies tin plated contacts)
0.5mm 000 979 021 EA Male counterpart 000 979 022 EA (EA signifies gold plated contacts)

1.0mm 000 979 133 E Male counterpart 000 979 134 E
1.0mm 000 979 133 EA Male counterpart 000 979 134 EA

2.5mm 000 979 225 E Male counterpart 000 979 226 E
2.5mm 000 979 225 EA Male counterpart 000 979 226 EA

Your plug terminal 8K0 973 702D has a male counterpart 2 pin black which is 1J0 973 802

0.5mm 000 979 025 E
0.5mm 000 979 025 EA
0.5mm 000 979 025 EC (EC signifies silver plated)
0.5mm 000 979 025 FA (FA signifies gold plated contacts with copper galvanised wires)

1.0mm 000 979 150 E
1.0mm 000 979 150 EA
1.0mm 000 979 150 EC

1.5mm 000 979 255 E

Your plug terminal 4F0 973 702 (do you mean fuel temperature sensor? Pressure sensor is a three pin plug). Male counterpart 5Q0 973 802

0.5mm 000 979 034 E/EA/EC Male counterpart 000 035 E/EA/EC

1.0mm 000 979 159 E/EA/EC Male counterpart 000 979 160 E/EA/EC
 
Last edited:
Could anyone point me in the right direction for a replacement 12v? I can't seem to find one that fits this adapter socket. Any help would be appriated

View attachment 92576
Think you need 1J0 919 309 B, BUT BEFORE ORDERING IT could you post the part number of the white plug to make sure, as the one I’ve found looks slightly different looking at it more carefully.

C85A08D5-D7AD-4753-A48F-B4CA7BF6E794.jpeg

D1EA121A-B102-4A3C-87FA-3A44F390C220.jpeg

20DC124C-347C-4842-B607-9E97A4F0251F.jpeg
 
Last edited:
Any idea what the part number is for the horn plug? I’m trying to find a match for the horn side of it so I can make an adapter loom up to fit different horns without cutting the original plug off to do so.
All the ones I find are too small when they arrive, the horn plug seems to be much larger than necessary.
 
@Grim Reaper - The horn plug does not have a counterpart listed other than device on ETKA at all. They use the later type contact pins in this plug housing. Have you tried 1J0 973 802? This uses the earlier type pins, but the plug may be mechanically coded to not fit.
 
Last edited:
Back
Top