5x112 to 5x120 adapter

[Yackers777]

Hi
Looking for bit of advice please
I’ve seen a st of wheels I like size 20” 8j to go on my t6 , but they are 5x112 off an Audi , wondering if anyone has used the adapters spacers to convert 5x112 to 5x120 , and if they are safe enough, the adapters are 20mm and the et on the wheels are 45 so would they still fit ok , tyres on the wheels are 255/35/20
Thanks in advance

 

[dubber36]

Before searching for adapters, make sure that the wheels are load rated for your van. The chances are that if they are off a car, they won't be.

 

[Yackers777]

Before searching for adapters, make sure that the wheels are load rated for your van. The chances are that if they are off a car, they won't be.

Yes they are aftermarket on a Audi a8 lwb

 

[Pewt]

They will work fine mate, people run adaptors all the time on Bentley, Porsche and Audi wheels. You can get them in 15mm which would be better as you may need to run a narrow tyre with 20mm.

 

[Yackers777]

They will work fine mate, people run adaptors all the time on Bentley, Porsche and Audi wheels. You can get them in 15mm which would be better as you may need to run a narrow tyre with 20mm.

Ah brilliant thanks for reply appreciate that mate

 

[Bav]

If you have a T32, the wheels won't necessarily be load-rated - GVW of an Audi A8 LWB is around 2950 kg.

 

[dubber36]

Also, OP says they are aftermarket wheels, so even more important that the ratings are confirmed.

 

[Yackers777]

If you have a T32, the wheels won't necessarily be load-rated - GVW of an Audi A8 LWB is around 2950 kg.

Thank you , I haven’t bought them they was 700kg

Also, OP says they are aftermarket wheels, so even more important that the ratings are confirmed.

Thank you haven’t bought them they was only 700kg