bed

I'm possibly going to look at reducing the height on my bed as SWMBO finds it too high (sigh). Anyone got any experience of doing this ? I'm guessing my little metal B&Q saw wont cut the mustard on the steel legs. What would I need ? Do Exploria do a px swap out on legs ? Any info gratefully...

Came across their page on Facebook. Look ideal for my requirements. Wondering if anyone has used them and have any feedback? TIA

Two black metal tubular frame units with ply tops and ends. The ply has been carpeted. Designed to provide rear side benches which can then be extended (extensions not included) to make single beds, the offside one being quite narrow, or if an infill panel was added (not included) a double. It...

Putting my Exploria Kombi Bed up for sale, the Bed is size 4 so works with the Kombi seats fitted as you can see from the photos, black vinyl covers on the pads which are great as you can take them out and use them on the ground wipe them down and put them back in. The frame legs have been...

This is a bespoke bed frame made for a March 2018 registered T6 VW Transporter LWB Kombi. It offers a bed 1740mm long and 1628mm wide that is 530mm off the floor, the same height as the folded down standard rear Kombi seats allowing the bed area to extend over the seats if necessary. I'm selling...

Hi all I just posted in ‘what have you done to your van today’ about the bed system I’m making and someone showed interest, so thought I’d put the details up. Even if it turns out to be a ‘how not to do it’... I had my T4 since 2006 and the way it was configured really worked for us. I got it as...

Morning everyone, I'm currently in the process of converting my T6 SWB. I'm well aware that this has probably been discussed alot, however I'm trying to get to grips with how to navigate the forum so apologies if I'm going over old ground. With regards to rock and roll bed, what are the must...

At last I think we have managed to crack getting a good night’s sleep on the rib bed. Sleeping directly on the seats was impossible and having tried various toppers, mattresses etc we have now settled with a therm-a-rest duo inflatable mattress which has two distinct sides allowing us to inflate...

Hi Thinking of selling my prototype Kombi bed as ready for a bit more conversion and a mk.2, made from OSB, sanded and varnished it's been installed in my T6 for a couple of years and works well as a temporary full width bed or shelf behind the seats. Frame fixes into the standard tie down...

I’ve just bought a SWB Caravelle Executive and the rock ‘n roll bed is 6’8”. This leaves no room to stand at the end of the bed when extended. Is this normal or have I been given a bed which should have been in a LWB?

I'm about to have my LWB T32 Kombi converted to Caravelle rails with a triple bench seat. It has got me thinking about the best way to make the most of the rear space behind the seats. Currently thinking about building a box out of phenolic ply, with a large lockable drawer and a double skin...

Good Morning, Our TD6 is fitted with a folding RIB, it works ok but its a bit to messy to open and close with those levers and my wifes feet wont touch the floor in the seating position. We have seen the Bedrock and it seems to be a better option for our needs, Have any of you got a Bedrock...

FOR SALE AS NEW DAYBED . FITTED ABOUT 3 MONTHS AGO BUT NEVER SLEPT ON , BOUGHT NEW E .OUNTAJN BIJES SO SPACE NEEDED AND BED HAS TO GO . SUPERBLY ENGINEERED BY VAN KING IT HAS THE ABILITY TO CONVERT FROM VAN TO BED IM ABOUT 5 MINS . IT HAS AN UNDER SHELF THAT CAN BE PULKED OUT TO USE AS A REAR...

Units in. Just wondering if all three quarter beds are the same width? Could someone measure the frame /seat width please?

As above selling mine as we are moving direction with the van. It also has the stand alone seats so can be used in a panel van comes with a heavy duty storage bag which cost over a £100 wanting £220 ideally

Plans got changed, so I had to change our LWB van interior to a standard style with rock n roll bed. So there is a T6 LWB U shaped bed system sitting at Van Furniture available for immediate delivery. Their current lead time for new orders for Laminated U shape Bed Kits : 5 - 7 weeks. Could...

Am seeing if there is a way to convert my LWB Kombi to be able to sleep and store MTBs securely at the same time . Was thinking about some sort of platform bed raised up under which I could clamp the bikes to the floor by the front wheels with droppers lowered (or outposts out) to save height...

We had our first trip away in our freshly converted van this weekend. We loved everything about the van, except... The bed. We were given a thin memory foam topper by the wife's dad, but that seemed to have no effect at all. So, we were looking at either a duvulay, which everyone seems to rave...

I’ve started installing my rib bed today as a mock up so I can make sure everything fits with kitchen etc. The only prob Em I have is that the 200mm sliding mechanism is too low for the wheel arch and the nuts holding the seat on fouls it so won’t slide properly. Any help would be appreciated thanks

In desperate need of a full width bed, I was told (by a fabrictor) I needed a crash tested bed to legally carry passengers, however I have had multiple people say they don’t need to be tested to legally carry passengers. Can anyone shine a light on this please. Would I still be insured to carry...