Hello,
I have seen a lot of posts about this but no solution to the symptoms that I have.
My wipers work in all speeds and go through cycle of cleaning but without the water. I cannot hear the washer pump when I pull the stalk.
I have checked 15amp fuse and tested this by putting it out with the wipers on and it cuts them out. (Read on here that they wipers and washer share the same fuse)
I have tried changing the washer pump as this is easy and quick to do. No luck there. (I tried 2 different ones just in case it’s faulty from supplier)
I have got 12v on my multimeter at the washer pump.
I have read about the bonnet sensor but my bonnet is closed and have not got a light showing it’s open.
I have made some test wires so I can work from inside the van and not rely on the misses to pull the wiper stalk. (12v on them aswell and nothing on either washer pump)
Any help would be appreciated.
![36FE0DBA-EBFD-44D0-87A4-EEC5C46CAEBF.png 36FE0DBA-EBFD-44D0-87A4-EEC5C46CAEBF.png](https://www.t6forum.com/data/attachments/224/224779-ddde9b39bf3f9c3986425b8b4d5c23c1.jpg)
![BE4AECE6-D836-44FA-85B1-7A448D32D9D0.png BE4AECE6-D836-44FA-85B1-7A448D32D9D0.png](https://www.t6forum.com/data/attachments/224/224780-7b5a506ffee248da99eac88dfb0f6872.jpg)
I have seen a lot of posts about this but no solution to the symptoms that I have.
My wipers work in all speeds and go through cycle of cleaning but without the water. I cannot hear the washer pump when I pull the stalk.
I have checked 15amp fuse and tested this by putting it out with the wipers on and it cuts them out. (Read on here that they wipers and washer share the same fuse)
I have tried changing the washer pump as this is easy and quick to do. No luck there. (I tried 2 different ones just in case it’s faulty from supplier)
I have got 12v on my multimeter at the washer pump.
I have read about the bonnet sensor but my bonnet is closed and have not got a light showing it’s open.
I have made some test wires so I can work from inside the van and not rely on the misses to pull the wiper stalk. (12v on them aswell and nothing on either washer pump)
Any help would be appreciated.
![36FE0DBA-EBFD-44D0-87A4-EEC5C46CAEBF.png 36FE0DBA-EBFD-44D0-87A4-EEC5C46CAEBF.png](https://www.t6forum.com/data/attachments/224/224779-ddde9b39bf3f9c3986425b8b4d5c23c1.jpg)
![BE4AECE6-D836-44FA-85B1-7A448D32D9D0.png BE4AECE6-D836-44FA-85B1-7A448D32D9D0.png](https://www.t6forum.com/data/attachments/224/224780-7b5a506ffee248da99eac88dfb0f6872.jpg)
Last edited: