VCP BCM Flash Guide

[dnoermann]

Does anyone know how to recode the bcm, without pulling the current info out as if replacing for new module as I think the lock smith has messed it up so code the bcm as if it a new fit

Niknak did you manage to get the Key learned ?
I already posted the Information regarding missing Channel 01 here: Need Connector Assignment of Onboard supply control unit for BCM upgrade and CCS on MFSW Project

 

[Niknak]

No mate still on going, going through the locksmiths insurance

 

[dnoermann]

No mate still on going, going through the locksmiths insurance

Is your BCM a Index D or E ? 7E0937090D 7E0937090E ?

 

[Niknak]

Damn was only reading it earlier can't remember

 

[zj283418]

Ok the BCM flashing procedurewith VCP is: Open VCP/ click More/Select Comfort/ Central Electrics/ Connect/ Flasher

Here we can chose the file location, choose file type and start the flash. .sgo is a VAS file if I remember correctly.

The one I have with E_0772.sgo but according to VCP is not compatible with my bcm so the procedure was not successful.

I might need to find something else. probably if I flash it with the same (compatible) firmware would fix my missing key adaptation channel.

Unfortunately VW not willing to help

Here is before data. I do not have battery regulator

Could you share 7E0937090E_0772.sgo to me? I need it. Thanks!