Vanstyle foglight kit help!

[ma77y]

Hi all

I've fitted an aftermarket foglight kit (vanstyle) to my sisters t6. She was sent the kit with no instructions and after multiple attempts to make contact with them to get some she's given up.

The loom sent has battery pos and neg ring terminals, 2 connectors for the foglights and a long white wire (crimped end) coming from the relay pack.

Am I right in thinking this has to go into the bcm plug somewhere? The kit included the new headlight switch with fog function.

any help would be grateful

 

[Pauly]

Ring terminals to battery (or suitable 12v supply of your choice)
Black plugs to rear of foglight units
Single wire to headlight switch plug

would need to lookup pin number for headlight switch but think its the only empty slot ?

 

[Pauly]

Its pin 5 on the heasdlight switch

Fog-Light retrofit guide

When I got the fog light bits off @Pauly, he said ‘take some photos’, so I’ve finally got around to writing up the fog light install for my Beach. I’ve put links to other videos and threads which explain things better than I can. Bumper removal Described many times on the forum and best shown...

www.t6forum.com

 

[ma77y]

Legend Pauly! My only concern is that the crimp looks far too big for the smaller headlight switch pins.