T6.1 Rear Washer Jet/Nozzle

[Srea064]

After owning our T6.1 for a few months now, it has become apparent that our rear washer nozzle is pathetic and only spraying about an inch up the rear screen into the wiper blade. Rather than messing about with a pin, trying to adjust it. I was simply going to replace it, as they just pull out, or so I’m lead to believe. Question to those who know… are these the same as earlier models, as everyone that I find only lists up to the T6.

Thank you.

 

[Kind of Blue]

Might you consider a wiper based squirter by extending the pipe along the windscreen arm and attaching a nozzle to near the junction of arm and wiper blade or beyond?

Rear wiper placement is very poor and much of an after thought not that the fronts are that good anyway. Cantilever design or twin wipers would to a much better swept area.

 

[Srea064]

That sounds like a good idea, thank you. I will look into this.

 

[Kind of Blue]

That sounds like a good idea, thank you. I will look into this.

Let us know what you decided and how you got on! Wipers are just poorly thought out and squirters the same. Only thing with exposed pipe might be insulation of said pipe.