T6.1 Heated Seats Values

[Scott2]

Surprisingly there is very little information on the factory values so that I can use these in adaptions.
I have put some values in to test installation and they seem to work well.
Now I have OEM install I’d like to complete the job with the correct values.
Please could someone with factory fitted seats share the below values

 

[Scott2]

Sorry, should of mentioned T6.1

 

[Skyliner33]

Sorry, should of mentioned T6.1

If you post the step by step guide how to get them I will, unless someone beats me to it?

 

[Scott2]

Much appreciated.
I’m not sure if there is a quicker way but this is what I have learnt in the last days.
Don’t worry you don’t need to change anything your end.
From opening screen - select control module
09 - Cent Elect
Adaptation - 10
Type ‘sitz’ into the search box
Select from channel list
Upon selecting one take photo

 

[Scott2]

Select control module

 

[Scott2]

09 - Cent Elect

 

[Scott2]

Adaption - 10

 

[Scott2]

‘Sitz’ in Search box

 

[Scott2]

Select one at a time

 

[Scott2]

Photo screen to share ‘Stored Value’

 

[Scott2]

Don’t hit Go Back
Just select the next channel and take another photo

 

[Scott2]

If someone has a T6.1 and a spare 15mins to grab 21 photos to post here it would be very much appreciated and if our paths cross I would more than happy to buy you a beer

I can then write a short overview and anyone going forward can have a step by step guide to follow.

 

[PaulR83]

Does this help? Previously read all my adaptations it seems

 

[Scott2]

Thank you.
Are these your adaptions or factory settings?
Any idea on voltage in the one but last setting?

 

[Skyliner33]

Much appreciated.
I’m not sure if there is a quicker way but this is what I have learnt in the last days.
Don’t worry you don’t need to change anything your end.
From opening screen - select control module
09 - Cent Elect
Adaptation - 10
Type ‘sitz’ into the search box
Select from channel list
Upon selecting one take photo

I just noticed this as you didn’t hit reply or tag me. I will do later if still needed.

 

[PaulR83]

These are factory ones.

This the one you mean?

 

[PaulR83]

To note mine were cloth seats from factory. Retrimmed in leather. Can't imagine anyone changed anything, they certainly don't get as hot as my golf, but the factory leather ones have a different element.

 

[Pauly]

FYI if you take an admap of the module it will spit out a .csv excel file with every adaption channel and value on a spreadsheet

I have admaps for everything in my 6.1 that I can share when I’m home

 

[Scott2]

I just noticed this as you didn’t hit reply or tag me. I will do later if still needed.

Sorry, didn’t respond correctly.
It would be much appreciated to get another set in addition.
I’m not sure if the PWM should ramp up as opposed to the above: 20 - 100 - 100 and if there should be LO voltage selection.

 

[Scott2]

FYI if you take an admap of the module it will spit out a .csv excel file with every adaption channel and value on a spreadsheet

I have admaps for everything in my 6.1 that I can share when I’m home

I thought there may of been a more efficient way but I’m literally 3hrs into VCDS……..
If you could share Paul that would be great