Specific T6.1 Wishbones ?

[BenT5]

Hi, I’m going to replace my 2021 T30 T6.1 front wishbones, easier than replacing just the bushes. Are all T6 wishbones the same or are the T6.1 ones different. I have the LED headlights so the level mech is attached to offside. Thanks in advance

 

[BenT5]

Update, got Meyle HD ones listed for T6 and they're prefect on the T6.1 as above

 

[VWDAZ71]

…..and easily fitted?

 

[BenT5]

…..and easily fitted?

Yes if you get new ball joints, very easy DIY driveway job

 

[JumpShip]

Where did you buy them Ben ?

 

[VWDAZ71]

Ok, thanks Ben…any part numbers?

 

[BenT5]

Got them from Autodoc but any Meyle supplier will have them. I got the ball joints locally, be careful as there are 2 types of ball joints, T32 or not I guess.

 

[JumpShip]

Thanks Ben

 

[nimrod]

Update, got Meyle HD ones listed for T6 and they're prefect on the T6.1 as above

View attachment 311159

are we looking at the black bar or the silver bar, VW quoted me about £360 for each part, ie times 2 . I haven't felt any play in mine but the garage said it was there. I will diy if they need to be done.

 

[BenT5]

are we looking at the black bar or the silver bar, VW quoted me about £360 for each part, ie times 2 . I haven't felt any play in mine but the garage said it was there. I will diy if they need to be done.

The whole black arm at the bottom of the picture going from left to right that the little silver arm attaches too, ie the complete wishbone. The bushes in these, especially the rear ones are a much better design that the factory ones.