T6.1 droplinks and ARB bushes
- Thread starter rover220
- Start date
Speak with @CRS Performance - he can advise and dispatch
.
Dont use the Meyle HD they are terrible .
What would your recommendation be?
I believe Steve recommends Lemforder, they don't oval the shock retainer hole like the Meyle HD ones can do.
Lemforder Link Coupling Rod Stabiliser Front Left Right For Vw 3096701 | eBay UK - these fit T5.1/T6, pretty sure they fit T6.1 but just double check
I did a bit of research online and the Meyle didn't get so much good press so I bought the Lemforder ones from ECP. However I had a nightmare trying to remove the old ones and then a spring snapped, so I ended up going to @CRS and they fitted my Lemforder for me. Was reassuring to find that those are the ones that they fit in preference to the Meyle.
I had them fit the Powerflex front ARB bushes too. So much smoother and a bit more precise on the steering now, but I had suffered a knocking noise for quite a while and the ARB bushes were shot to pieces.
I had them fit the Powerflex front ARB bushes too. So much smoother and a bit more precise on the steering now, but I had suffered a knocking noise for quite a while and the ARB bushes were shot to pieces.
Phew, that’s a relief! Especially as he advised against what you ordered.
So new drop links and powerflex bushes fitted and it's still knocking. Strut top mount bolts tight.
This is on the h and r coilovers from CRS, van on 18k so unsure what what else would be worn.
@CRS Performance would you mind taking a look if I call by?
This is on the h and r coilovers from CRS, van on 18k so unsure what what else would be worn.
@CRS Performance would you mind taking a look if I call by?
Yes happy to take a look for you .
Similar threads
