ply lining ?

[71bay]

Bit of a tall order but....
The ply lining was fitted to my van with self tappers.
It looks awful.
I am planing on fitting it back with the original plastic style clips but the ply does not have the holes for the clips.
Is there anywhere that I could get the hole measurements from ?
Thanks in advance Martin.
PS it is a 2013 5.1

 

[DXX]

It’s possible to get the original lining boards for a very low price / free secondhand.
You can use these as a pattern or fit them instead of the ply.

 

[david173]

have you taken out the ply to see if there are any OEM panels behind that you could use as a template?

 

[Paynewright]

If it is full overlay ply lining the OEM fixing holes might be a long way from the lining, meaning the clips will not reach

A few pics will help the forum experts advise.

 

[71bay]

Thanks for the replies. I have removed the ply prior to sound deadening. I can see where the plastic clips will fit , they are within the ply panels . It's a kombi if that makes a difference. Thanks.